Airtac MIC Cushioned Mini Cylinder MIC25X25SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X25SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X25SCM
Dialing in end-of-stroke deceleration is effortless with the AirTAC MIC25X25SCM, a round-body stainless steel mini cylinder built for double-acting service. Its integrated needle valves absorb high-velocity impact at both ends, outperforming fixed bumper designs in noise and shock reduction. The stainless barrel and rod withstand mild washdowns, while the CM round rear cover keeps port orientation clean and compact.
Generating 245.3 N of push and 206.1 N of pull at 0.5 MPa, this Ø25 unit handles meaningful work. It safely moves a 147 N load, lifting about 12.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread match standard mini-cylinder hardware, and the built-in -S magnet supports CMSG, DMSG, and EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC25X25SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X25SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X25SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X25SCM Is Used
Package Diverting
Snaps a lightweight routing gate at high speed. The needle-set air cushion halts the 12.5 kg gate assembly smoothly without bounce.
Film Sealing Head
Drives a sealing jaw with 245 N of push at 0.5 MPa. Stainless construction resists sticky film residues during washdown cycles.
Short-Stroke Stops
Acts as a 25 mm stroke pallet stop. The CM rear cover and ISO 6432 dimensions allow tight bracket mounting under the conveyor.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X25SCM the Right Cylinder?
If you need less force, the MIC20X50 delivers 157 N push at 0.5 MPa; for heavier loads, the MIC32X75S jumps to 402.2 N. Choose this Ø25 bore when moving moderate masses at high speeds where the adjustable air cushion prevents destructive end-stroke slamming. Remember that the cushion only decelerates the piston—it does not lock the load. If air pressure drops, the rod will drift, so fit an external rod lock or pilot check valve for vertical holding. Mounting is highly flexible: use LB foot, FA flange, SDB pivot, or TC trunnion brackets to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X25SCM FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a 1/8" air port and a 10 mm piston rod with an M10x1.25 male thread.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end to reduce shock; it is not a brake. The cylinder will drift on air loss, so use a pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X25SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.