Airtac MIC Cushioned Mini Cylinder MIC25X300CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X300CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X300CM
High-speed actuation demands precise end-of-stroke control, and the AirTAC MIC25X300CM answers with a needle-set air cushion at both ends. This double-acting, round-body stainless steel mini cylinder absorbs shock to protect your payload, pushing with 245.3 N and pulling with 206.1 N at 0.5 MPa. The 300 mm stroke and CM round rear cover provide flexible mounting, while the 1/8" port ensures reliable airflow for the 30-800 mm/s speed range.
Built with a corrosion-resistant stainless barrel and rod, it handles mild washdown environments effortlessly. It uses the standard ISO 6432 mounting interface for easy bracket integration. Lacking the -S suffix, this specific SKU cannot host CMSG, DMSG, or EMSG sensors. For vertical moves, it lifts about 12.5 kg safely with a 2:1 margin, yielding a safe working load near 147 N.
Airtac MIC Cushioned Mini Cylinder MIC25X300CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X300CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 300 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X300CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X300CM Is Used
Package Diverting
Pushes light to medium cartons at high cycle rates. The adjustable air cushion prevents harsh slams at the 300 mm stroke end, protecting the package contents.
Light Assembly Ejection
Ejects completed sub-assemblies from a fixture. The 245.3 N push force clears the part reliably, while the stainless build resists minor shop fluid splashes.
Vertical Lift Gates
Raises small access doors or baffles. With a safe working load near 147 N, it lifts about 12.5 kg vertically with a 2:1 safety margin before the cushion softens the stop.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X300CM the Right Cylinder?
When sizing this 25 mm bore, dropping down to the MIC20X50 reduces the push force to 157 N at 0.5 MPa, while stepping up to the MIC32X75S raises it to 402 N. Choose this 245 N class when moving moderate masses at high velocities where the adjustable cushion is essential to prevent harsh impacts. The cushion needle only decelerates the piston near the stroke ends; it does not lock the rod. If your system loses air, the load will drift, requiring an external rod lock or pilot check valve for secure holding.
This model features a CM round rear cover and supports LB foot, FA flange, SDB pivot, and TC trunnion mounts. Because this SKU lacks the internal magnet, it cannot accept position switches; you must specify an -S variant to use CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X300CM FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include the internal magnet, so it cannot host CMSG, DMSG, or EMSG switches. You must order the -S variant for sensing capabilities. It still features the adjustable air cushion and stainless steel construction for high-speed shock absorption.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X300CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.