Airtac MIC Cushioned Mini Cylinder MIC25X300SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X300SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X300SU
Driving 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles a 300 mm travel requirement with precision. The Ø25 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. It features a 1/8" port and an M10x1.25 male rod thread.
A defining trait of the MIC series is the adjustable air cushion at both ends, letting you tune a needle valve to decelerate heavy loads smoothly at high speeds rather than slamming into a fixed bumper. The stainless barrel and rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it supports CMSG, DMSG and EMSG position switches. Factoring a 2:1 safety margin, it lifts about 12.5 kg vertically, equating to a safe working load near 147 N.
Airtac MIC Cushioned Mini Cylinder MIC25X300SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X300SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 300 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X300SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X300SU Is Used
Package Diverting
Uses the 245.3 N thrust to push medium-weight cartons off a high-speed belt line, relying on the adjustable cushions to stop the 300 mm stroke without harsh impacts.
Film Sealing Press
Drives a sealing jaw over a long travel distance, where the needle-set cushions ensure the jaw decelerates smoothly before crushing the packaging material.
Vertical Lift Gate
Lifts a 12.5 kg access gate with a 2:1 safety margin, taking advantage of the stainless build for humid warehouse environments and the -S magnet for position feedback.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X300SU the Right Cylinder?
When sizing this 300 mm stroke actuator, compare it against the adjacent bores in the range. Stepping down to the Ø20 bore drops the 0.5 MPa push force to 157 N, while stepping up to the Ø32 bore increases it to 402 N. Choose this Ø25 model when your application demands that middle-ground thrust. The adjustable end cushions are essential if you are running near the 800 mm/s maximum speed, as they absorb kinetic energy and protect the load.
This variant uses a U-style back cover for 90-degree port and mounting orientation. Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If your machine loses air, the piston will drift, so fit an external rod lock or pilot check valve to hold a suspended load. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion blocks.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X300SU FAQ
This double-acting cylinder has a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and is not a brake or lock. If air pressure is lost, the piston will drift, requiring an external rod lock or pilot check valve to hold a suspended load securely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X300SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.