Airtac MIC Cushioned Mini Cylinder MIC25X305SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X305SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 305mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke305 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X305SCA
Tune out end-of-stroke bang with the AirTAC MIC25X305SCA, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. It uses the ISO 6432 mounting interface, making it a drop-in spares win for standard mini brackets, and features a CA pivot rear cover. A 1/8" port feeds the 10 mm piston rod (M10x1.25 male thread).
At 0.5 MPa this 25 mm bore pushes 245.3 N and pulls 206.1 N, peaking at a 50 kgf theoretical max at 1.0 MPa. The defining trait over a bumper MI is the adjustable air cushion at both ends: you dial a needle valve to decelerate the 305 mm stroke at high speed, protecting the load and cutting noise. For sizing, this translates to a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 margin. The -S suffix means a built-in magnet is present for CMSG, DMSG, or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC25X305SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X305SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 305 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X305SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×305 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X305SCA Is Used
Package Diverting
Routes small cartons at 30-800 mm/s without slamming, using the adjustable cushion to soften the 245.3 N push impact at the end of the 305 mm travel.
Vertical Lift Stations
Raises lightweight jigs weighing up to 12.5 kg, relying on the stainless build for humid environments and the CA pivot to manage side loads.
Light Assembly Press
Applies a controlled 206.1 N pull force at 0.5 MPa to seat components, dialing in the end cushion to protect delicate tooling from shock.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X305SCA the Right Cylinder?
If your payload is lighter, the MIC20X50 class drops the 0.5 MPa push force to 157 N, whereas stepping up to the MIC32 bore raises it to 402.2 N for heavier moving masses. Choose this 25 mm bore when cycle speeds demand the adjustable air cushion to prevent harsh impacts. Remember that the cushion only decelerates near the stroke end; it does not lock the rod. If you need to hold a load vertically during air loss, add an external rod lock or pilot check valve. Mount it via LB foot, FA flange, or TC trunnion, and use the -S magnet with CMSG, DMSG, or EMSG sensors for end-position confirmation.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X305SCA FAQ
This double-acting cylinder pushes 245.3 N and pulls 206.1 N at 0.5 MPa. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N, with a theoretical max of 50 kgf at 1.0 MPa. The air port is 1/8" and the male rod thread is M10x1.25.
The MIC25X305SCA features an adjustable air cushion at both ends that decelerates the piston near stroke end to reduce shock, but it is not a locking brake. The -S suffix indicates a built-in magnet, allowing you to mount CMSG, DMSG, or EMSG switches for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X305SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.