Airtac MIC Cushioned Mini Cylinder MIC25X30SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X30SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X30SCM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder integrates an adjustable air cushion at both ends to absorb high-speed shocks. The Ø25 mm bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. Its stainless barrel and rod resist mild corrosion and washdown environments, while the CM round rear cover provides a clean, versatile port and mounting orientation.
Equipped with a built-in piston magnet (-S), the unit supports CMSG, DMSG, and EMSG position switches for precise end-of-stroke detection. With a 1/8" air port and a 30 mm stroke, it handles rapid cycles efficiently. The needle-set cushions decelerate the load smoothly near stroke end, cutting noise and protecting the mechanism without acting as a physical lock.
Airtac MIC Cushioned Mini Cylinder MIC25X30SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X30SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X30SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X30SCM Is Used
Package Diverting
Rapidly sorts small to mid-weight parcels on a conveyor belt, using the adjustable cushion to halt the stroke gently without jarring the goods.
Component Seating
Presses bearings or pins into light assemblies at speed, relying on the 245 N thrust and shock absorption to prevent damage on contact.
Flap Folding
Folds carton flaps cleanly in automated packaging lines where the stainless build withstands occasional washdowns and the cushion softens the fold.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X30SCM the Right Cylinder?
For lighter duties, the Ø20 bore offers 157 N of push at 0.5 MPa, whereas stepping up to the Ø32 yields 402 N if your application demands more thrust. Choose this Ø25 model when moving intermediate loads at high speeds where the adjustable air cushion is essential to prevent end-of-stroke impact. Based on the 0.5 MPa push rating, the safe working load is approximately 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin.
Because a standard cylinder drifts when air pressure drops, add an external rod lock or pilot-operated check valve if you need to hold a suspended load securely. The -S magnet enables sensor tracking, and you can adapt the unit using LB foot, FA flange, SDB pivot, or TC trunnion hardware alongside the CA, U, R, or CM back cover options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X30SCM FAQ
This double-acting cylinder has a 1/8" port and generates 245.3 N push and 206.1 N pull at 0.5 MPa, and 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa. It features a needle-set adjustable air cushion at both ends to decelerate the load smoothly.
The air cushion only decelerates the piston near the stroke end; it is not a brake, so the cylinder will drift on air loss. Use an external rod lock or pilot check valve to hold a vertical load. The -S magnet allows CMSG, DMSG, and EMSG switches to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X30SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.