Airtac MIC Cushioned Mini Cylinder MIC25X350CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X350CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X350CA
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X350CA is a double-acting, round-body stainless steel mini cylinder built for a 350 mm stroke. Its defining feature is the adjustable air cushion at both ends, allowing you to tune a needle valve to decelerate heavy loads smoothly at high speeds, drastically reducing end-of-stroke shock and noise compared to fixed bumper designs. The stainless barrel and rod provide reliable mild corrosion resistance for washdown or humid settings.
This Ø25 mm bore unit uses a 1/8" port and conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises. It features a CA rear pivot cover for articulated mounting. With a practical safe working load of roughly 147 N, it can vertically lift about 12.5 kg with a 2:1 safety margin. Note this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC25X350CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X350CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X350CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X350CA Is Used
High-Speed Diverting
Uses the 245.3 N thrust to push packages on a conveyor, relying on the adjustable air cushion to stop the 350 mm stroke smoothly without slamming.
Carton Flap Folding
Articulated via the CA pivot cover to follow packaging geometry, tuning the end cushions prevents crushing cardboard at rapid cycle rates.
Vertical Lift Gates
Lifts light access gates weighing up to 12.5 kg vertically, using the stainless construction to withstand humid or mildly corrosive warehouse environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X350CA the Right Cylinder?
When sizing this bore, stepping down to the MIC20X50 yields 157.0 N of push force at 0.5 MPa, while stepping up to the MIC32X75S provides 402.2 N. Choose this Ø25 model when your application requires moving moderate loads at high speeds where the adjustable air cushion is essential to prevent impact damage. The cushion only decelerates the piston near the stroke end; it does not function as a lock or brake.
Because this is a plain double-acting cylinder, the piston will drift if air pressure drops or the valve is centered, so add an external rod lock or pilot-operated check valve if you need to hold a suspended load. For mounting flexibility, pair the CA back cover with LB foot, FA flange, SDB pivot, or TC trunnion hardware. If you require position sensing, select the -S magnet variant to enable sensor tracks.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X350CA FAQ
This double-acting cylinder uses a 1/8" port and generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for sensing. The adjustable air cushions and stainless build remain identical.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X350CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.