Airtac MIC Cushioned Mini Cylinder MIC25X400SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X400SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke400 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X400SCM
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X400SCM is a double-acting, round-body stainless steel mini cylinder built for a 400 mm stroke. A needle-set variable air cushion at both ends soaks up high-speed end-of-stroke shock, protecting your payload and cutting noise far better than a fixed bumper. The stainless barrel and rod resist mild corrosion and washdown environments.
This Ø25 bore uses a 1/8" port and an M10x1.25 male rod thread, conforming to the ISO 6432 mounting interface for easy bracket interchange. With a safe working load around 147 N, it lifts about 12.5 kg vertically with a 2:1 margin. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches, while the CM round rear cover provides specific port and mounting orientation.
Airtac MIC Cushioned Mini Cylinder MIC25X400SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X400SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X400SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X400SCM Is Used
High-Speed Carton Diverting
Uses the 245.3 N push force to push packages at 800 mm/s, relying on the adjustable air cushion to prevent harsh slamming at the 400 mm stroke end.
Vertical Material Lift
Lifts roughly 12.5 kg of raw materials safely with a 2:1 margin, where the stainless construction handles mildly humid plant conditions.
Light Press Assembly
Applies 206.1 N of pull force at 0.5 MPa to seat components, using the ISO 6432 mounting interface for easy drop-in replacement.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X400SCM the Right Cylinder?
If you need less force, the Ø20 MIC bore provides 157 N of push at 0.5 MPa; stepping up to the Ø32 yields 402 N for heavier loads. The adjustable cushion is essential for this 400 mm stroke when operating at high speeds or moving substantial mass, as it decelerates the piston smoothly. Note that the cushion only eases the stop and does not lock the rod; if you need to hold a load vertically during air loss, add an external rod lock or pilot check valve.
Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X400SCM FAQ
This double-acting cylinder uses a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
It features a needle-adjustable air cushion at both ends that decelerates the piston near stroke end to reduce shock, but it is not a brake. The -S designation means it has a built-in magnet for CMSG, DMSG, or EMSG switches, and the stainless build resists mild corrosion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X400SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.