Airtac MIC Cushioned Mini Cylinder MIC25X40SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X40SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 40mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke40 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X40SCM
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X40SCM is a double-acting, round-body stainless steel mini cylinder built for demanding tasks. It uses the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. The included -S piston magnet enables CMSG, DMSG, and EMSG switches for position sensing, while the CM round end cover handles rear porting and mounting orientation.
A defining feature is the adjustable air cushion at both ends, letting you tune a needle valve to absorb high-speed end-of-stroke shock instead of relying on a fixed bumper. The stainless barrel and rod resist mild corrosion and washdown environments. With a safe working load of roughly 147 N, it lifts about 12.5 kg vertically with a 2:1 safety margin. It operates at 30-800 mm/s and uses a 1/8" port.
Airtac MIC Cushioned Mini Cylinder MIC25X40SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X40SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 40 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X40SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X40SCM Is Used
High-Speed Diverting
Uses the adjustable air cushion to smoothly divert 12 kg cartons on a conveyor at high speed without harsh end-of-stroke impacts.
Packaging Line Pusher
Pushes medium-weight packaging materials with 245.3 N of force, relying on the stainless build to resist mild washdown corrosion.
Compact Part Ejection
Ejects finished parts from a machine bed using the ISO 6432 mounting interface, dropping easily into standard mini clevis brackets.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X40SCM the Right Cylinder?
If you need less force, the MIC20 bore provides 157 N of push at 0.5 MPa; stepping up to the MIC32 yields 402 N for heavier payloads. Choose this 25 mm bore when moving moderate loads at high speeds where the adjustable cushion prevents end-of-stroke banging. Remember that the cushion only decelerates the piston near the stroke end—it is not a lock or brake. If your application must hold a vertical load on air loss, add an external rod lock or pilot-operated check valve.
This SKU includes the -S magnet for CMSG, DMSG, or EMSG sensors. You can mount it using LB foot, FA flange, SDB pivot-block, or TC trunnion hardware, alongside the CA, U, R, or CM back covers. It features a 10 mm rod with an M10x1.25 male thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X40SCM FAQ
At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical max force is 50 kgf at 1.0 MPa. It has a 25 mm bore, 40 mm stroke, 10 mm rod, M10x1.25 male rod thread, and a 1/8" port.
It features an adjustable air cushion at both ends that decelerates the piston near the stroke end to reduce shock; it is not a braking lock. Because this model includes the -S magnet, you can mount CMSG, DMSG, or EMSG switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X40SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.