Airtac MIC Cushioned Mini Cylinder MIC25X450CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X450CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 450mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke450 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X450CM
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles a 450 mm stroke with precision. The CM round rear cover provides a clean back-end profile for compact assemblies. A 1/8" port feeds the Ø10 mm piston rod, and the male M10x1.25 thread makes load mounting straightforward.
Twin adjustable air cushions distinguish this unit from fixed-bumper mini cylinders, letting you dial in needle valves to absorb high-speed end-of-stroke shock. The rolled stainless barrel and rod shrug off mild washdown corrosion. It yields a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors without switching to the -S variant.
Airtac MIC Cushioned Mini Cylinder MIC25X450CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X450CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 450 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X450CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X450CM Is Used
Package Diverting
Uses the 245.3 N push force to deflect medium-weight cartons on a sorting line, relying on the dual air cushions to halt the 450 mm stroke quietly at high speed.
Vertical Lift Gates
Lifts light access gates weighing up to 12.5 kg with a 2:1 safety factor, where the stainless build resists humid dock environments.
Light Press Assembly
Drives a 450 mm tooling slide to seat components, using the CM rear cover for tidy mounting while the needle cushions soften the return impact.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X450CM the Right Cylinder?
If your drive needs less force, the MIC20X50 class supplies 157 N push at 0.5 MPa, while stepping up to the MIC32 bore yields 402 N for heavier payloads. Choose this Ø25 bore when moving moderate masses over long distances at high cycling speeds where the adjustable end cushions are essential to prevent impact damage. The cushions only decelerate the load near the stroke ends; they do not act as a brake. To prevent drift on air loss, install an external rod lock or pilot check valve. It uses standard ISO 6432 mounting dimensions for easy bracket swaps, and you must select the -S magnet version if position sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X450CM FAQ
This double-acting cylinder uses a 1/8" air port and a Ø10 mm rod. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum of 50 kgf at 1.0 MPa.
No, this specific SKU lacks a piston magnet and cannot accept CMSG, DMSG or EMSG switches; you need the -S variant for sensing. The adjustable air cushions at both ends only serve to decelerate the load near stroke end and do not lock the rod.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X450CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.