Airtac MIC Cushioned Mini Cylinder MIC25X475SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X475SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 475mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke475 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X475SCM
Dialing in end-of-stroke deceleration is effortless with the AirTAC MIC25X475SCM, a double-acting round-body mini cylinder built around a needle-set variable air cushion at both ends. This stainless-steel riveted barrel and rod assembly shrugs off mild washdown environments while pushing 245.3 N at 0.5 MPa. Because it carries the -S suffix, a built-in piston magnet enables CMSG, DMSG and EMSG position sensing.
The 25 mm bore runs an M10x1.25 male rod thread and a 1/8 inch port, conforming to the ISO 6432 mounting interface for straightforward bracket interchange. At 475 mm of stroke, the unit lifts about 12.5 kg vertically with a 2:1 safety margin. The rear CM round cover provides a clean back-end profile for tight machine layouts.
Airtac MIC Cushioned Mini Cylinder MIC25X475SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X475SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 475 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X475SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X475SCM Is Used
High-Speed Carton Diverting
Uses the 245.3 N push force to deflect heavy packaging on a fast line, relying on the adjustable air cushion to prevent harsh end-of-stroke impacts.
Controlled Vertical Lowering
Lifts around 12.5 kg safely with a 2:1 margin, while the needle-set cushion decelerates the 475 mm descent smoothly to protect fragile payloads.
Stainless Component Ejection
Ejects machined parts in humid environments where the stainless barrel resists mild corrosion and the CM rear cover fits compact tooling spaces.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X475SCM the Right Cylinder?
When sizing this 245.3 N push class, dropping down to the MIC20 drops output to 157 N, while stepping up to the MIC32 yields 402.2 N. The adjustable air cushion is essential here for a 475 mm stroke carrying a heavy load at high speed, as the needle valve soaks up kinetic energy without a hard bumper crash. If you need to hold the load vertically on air loss, remember the cushion only decelerates near the end of travel; add an external rod lock or pilot check valve.
The -S magnet is already specified for electronic or reed switches. Mounting hardware includes LB foot, FA flange, SDB pivot-block and TC trunnion options to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X475SCM FAQ
This 25 mm bore cylinder features a 1/8 inch port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The -S suffix indicates a built-in piston magnet for CMSG, DMSG or EMSG position switches. The adjustable air cushion only decelerates the piston near stroke end and does not act as a brake; for holding a vertical load on air loss, install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X475SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.