Airtac MIC Cushioned Mini Cylinder MIC25X485SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X485SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 485mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke485 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X485SCM
Tame high-cycle shock with the AirTAC MIC25X485SCM, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. A variable air cushion at both ends lets you dial in the needle to decelerate the piston smoothly, protecting your payload at the end of a long 485 mm stroke. The CM round rear cover keeps port orientation clean for tight assemblies.
Delivering 245.3 N of push force at 0.5 MPa, this Ø25 bore unit yields a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 margin. The 1/8" port and M10x1.25 male rod thread match standard mini-cylinder expectations, and the built-in magnet (-S) supports CMSG, DMSG, and EMSG switches. It uses the ISO 6432 mounting interface for direct bracket interchangeability.
Airtac MIC Cushioned Mini Cylinder MIC25X485SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X485SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 485 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X485SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×485 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X485SCM Is Used
Long-Reach Divert
Pushes light cartons across a 485 mm gap using 245 N of thrust while the air cushion absorbs the stopping shock.
Flap Folding
Extends to fold large carton flaps smoothly, using the adjustable needle to prevent crushing the board at high speed.
Vertical Lift Gate
Raises a 12 kg access panel vertically with a 2:1 safety margin, relying on the stainless rod for mild corrosion resistance.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X485SCM the Right Cylinder?
If you need less force, the MIC20 bore provides 157 N push at 0.5 MPa; for heavier drives, the MIC32 steps up to 402 N. Choose this 485 mm stroke for long reaches where end-of-stroke velocity builds momentum, making the adjustable cushion essential. Remember that the cushion only decelerates the piston near the end of travel—it is not a brake. The piston will drift if air pressure drops, so fit an external rod lock or pilot check valve for suspended loads.
Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets. Because this SKU includes the -S magnet, you can mount CMSG, DMSG, or EMSG sensors directly for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X485SCM FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. This Ø25 bore cylinder uses a 1/8" port and a 10 mm rod with an M10x1.25 male thread.
Yes, the -S suffix means it has a built-in magnet for CMSG, DMSG, and EMSG switches. The variable air cushion only decelerates the piston near stroke end to reduce shock; it is not a lock. If you need to hold a load vertically, install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X485SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.