Airtac MIC Cushioned Mini Cylinder MIC25X50U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X50U is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X50U
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder brings needle-set air cushioning to both stroke ends. Tuning the cushion lets you decelerate heavy loads smoothly at high speeds, actively reducing shock and noise compared to fixed-bumper designs. The Ø25 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises.
Built with a stainless-steel barrel and piston rod for mild corrosion and washdown resistance, it features a 1/8" port, an M10x1.25 male rod thread, and a U-style 90-degree rear cover for specific mounting orientations. With a 245.3 N push force, it handles a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin. Note this SKU lacks a magnet, so it cannot accept CMSG, DMSG, or EMSG sensors without upgrading to the -S variant.
Airtac MIC Cushioned Mini Cylinder MIC25X50U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X50U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X50U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X50U Is Used
Package Diverting
Pushes light-to-medium cartons at high cycle rates on a sorting line, using the adjustable cushion to prevent harsh impacts at the stroke end.
Lid Pressing
Applies a consistent 245 N clamping force to seal containers, with the needle-set cushion ensuring the press decelerates smoothly before bottoming out.
Parts Ejection
Ejects finished components from a machining area, leveraging the 12.5 kg vertical lift capacity and stainless build to handle washdown environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X50U the Right Cylinder?
When sizing this 25 mm bore, step down to the MIC20 if your load is lighter (it provides 157 N push at 0.5 MPa), or move up to the MIC32 for heavier payloads (402.2 N push at 0.5 MPa). The adjustable air cushion is essential when cycling at high speeds or moving substantial mass, allowing you to dial in the exact deceleration needed to protect the mechanism. This U-cover model suits compact 90-degree mounting layouts.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If air pressure drops, the piston will drift, so fit an external rod lock or pilot-operated check valve if you need to hold a suspended load. Because this specific SKU has no internal magnet, position sensing is impossible—select the -S version if your application requires CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X50U FAQ
This double-acting cylinder uses a 1/8" port and generates 245.3 N push / 206.1 N pull at 0.5 MPa, and 343.4 N push / 288.5 N pull at 0.7 MPa. Its theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include an internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must choose the -S magnet variant for sensing. The stainless build offers mild corrosion resistance, and the adjustable air cushion decelerates the load but does not lock it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X50U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.