Airtac MIC Cushioned Mini Cylinder MIC25X55SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X55SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 55mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X55SU
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder handles demanding 25 mm bore tasks. The U-style rear cover provides a 90-degree mounting orientation, while the 1/8" port keeps air flow responsive. Because the -S suffix includes a piston magnet, you can mount CMSG, DMSG or EMSG switches for position sensing.
Twin adjustable air cushions let you dial in end-of-stroke deceleration, protecting payloads at high cycle speeds. The stainless barrel and rod shrug off mild washdown corrosion. For vertical moves, expect a safe working load around 147 N, lifting about 12.5 kg with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X55SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X55SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 55 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X55SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X55SU Is Used
Package Diverting
Snaps a 12 kg carton across a belt at speed, relying on the adjustable cushion to prevent harsh slams at the 55 mm stroke end.
Small Press Ejection
Pushes finished parts out of a die using 245.3 N of thrust, with the U cover allowing a tidy 90-degree mount on the press frame.
Flap Folding
Folds heavy cardboard flaps rapidly where the stainless rod resists factory grit and the needle-set cushion softens the impact.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X55SU the Right Cylinder?
If 245.3 N push at 0.5 MPa is too much, step down to the MIC20 (157.0 N push); if you need more muscle, the MIC32 offers 402.2 N. Choose this 55 mm stroke when you need short, fast moves where the needle-set cushion prevents harsh end impacts. It uses the ISO 6432 mounting interface, dropping into standard mini brackets.
Remember the cushion only decelerates the load; it is not a brake. If air pressure drops, the piston will drift, so fit an external rod lock or pilot check valve for vertical holding. The -S magnet enables sensors, and you can adapt mounting via LB foot, FA flange, SDB pivot or TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X55SU FAQ
This 25 mm bore cylinder has a 1/8" port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, or 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The -S suffix means it has a built-in magnet for CMSG, DMSG or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold position. For vertical loads, install an external rod lock or pilot check valve to prevent drifting on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X55SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.