Airtac MIC Cushioned Mini Cylinder MIC25X600CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X600CM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X600CM
Handling mid-range tasks with 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder brings pneumatic motion to long-reach applications. The 600 mm stroke on this CM round-end configuration exceeds the 500 mm standard catalog limit, making it a non-standard, made-to-order item for specialized travel requirements. It uses a 1/8 inch port and a 10 mm piston rod with an M10x1.25 male thread.
A defining feature is the adjustable air cushion at both ends, allowing you to needle-set the deceleration to absorb high-speed end-of-stroke shock, protecting your payload and reducing noise. The stainless barrel and rod resist mild corrosion and washdown environments. Because this unit lacks the -S magnet option, it cannot accept CMSG, DMSG, or EMSG sensors. With a 245.3 N push force, it yields a safe working load of about 147 N, capable of lifting roughly 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X600CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X600CM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X600CM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X600CM Is Used
Long-Reach Door Opening
Uses the 600 mm non-standard stroke to fully actuate large industrial access doors, relying on the 245.3 N push force to overcome friction.
High-Speed Diverting
Pushes packages across a transfer line at high speed while the adjustable air cushion absorbs the end-of-stroke shock to protect the mechanism.
Vertical Material Lift
Lifts components of about 12.5 kg in a washdown-friendly stainless build, taking advantage of the 2:1 safety margin on the 0.5 MPa push force.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X600CM the Right Cylinder?
When sizing this 25 mm bore actuator, consider stepping down to the MIC20, which provides 157.0 N of push force at 0.5 MPa for lighter loads, or scaling up to the MIC32, which delivers 402.2 N for heavier dynamics. The adjustable cushion is essential if you are driving the 600 mm stroke at high speeds or moving significant mass, as it prevents harsh impacts. Remember that the cushion only decelerates the piston near the stroke end; it is not a brake. If your application must hold a load vertically during air loss, add an external rod lock or pilot-operated check valve, because the piston will drift. This model features a CM round rear cover and drops into standard ISO 6432 mini-cylinder brackets and clevises.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X600CM FAQ
This double-acting cylinder uses a 1/8 inch port and generates 245.3 N push and 206.1 N pull at 0.5 MPa. At 0.7 MPa, push is 343.4 N and pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. The adjustable air cushion and stainless steel construction are still standard.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X600CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.