Airtac MIC Cushioned Mini Cylinder MIC25X600SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X600SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X600SCM
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X600SCM is a double-acting, round-body stainless-steel mini cylinder built for demanding motion control. It features a 25 mm bore, a 600 mm stroke, and a 1/8" air port. This extended 600 mm stroke exceeds the 500 mm standard maximum, making it a non-standard, made-to-order unit for applications requiring extra reach. The stainless barrel and piston rod resist mild corrosion and washdown environments.
A defining feature of this series is the adjustable air cushion at both ends, which allows you to tune a needle valve to absorb end-of-stroke shock at high speeds, protecting the load and reducing noise. It uses the standard ISO 6432 mini-cylinder mounting interface for easy bracket integration. With a safe working load of about 147 N, it can lift roughly 12.5 kg vertically with a 2:1 safety margin. The built-in piston magnet (-S) supports CMSG, DMSG, and EMSG switches, and the CM round rear cover provides flexible port and mounting orientation.
Airtac MIC Cushioned Mini Cylinder MIC25X600SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X600SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X600SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X600SCM Is Used
Extended-Reach Vertical Lift
Lowers and raises 12 kg packaging trays over a 600 mm drop. The adjustable air cushion prevents harsh slamming at the bottom of the stroke, protecting the tray contents.
High-Speed Diverting Gate
Actuates a routing flap on a washdown conveyor line. The stainless construction handles mild moisture, while the 245 N push force easily moves the gate against product flow.
Long-Stroke Pusher Assembly
Transfers cardboard cartons from an accumulator onto a shipping belt. The 600 mm reach clears wide machinery gaps, and the cushion needle damps the rapid push stroke.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X600SCM the Right Cylinder?
When sizing this 25 mm bore unit, stepping down to a 20 mm MIC bore drops the 0.5 MPa push force to 157 N, while stepping up to a 32 mm bore increases it to 402 N. Choose this model when moving heavier loads at high speeds, as the adjustable air cushion is essential for smoothing deceleration and preventing impact damage. Note that the cushion only decelerates the piston near the stroke end; it does not function as a lock or brake. If your application must hold a load vertically during air loss, install an external rod lock or a pilot-operated check valve.
This 600 mm stroke is non-standard and made to order. For mounting flexibility, the design supports LB foot, FA flange, SDB pivot-block, and TC trunnion options. Because this SKU includes the -S magnet, it is fully compatible with CMSG, DMSG, and EMSG sensors for position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X600SCM FAQ
This 25 mm bore cylinder features a 1/8" air port and a male M10x1.25 rod thread. It generates a push force of 245.3 N and a pull force of 206.1 N at 0.5 MPa. At 0.7 MPa, the push force is 343.4 N and the pull force is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, the cylinder cannot hold a load on air loss; the piston will drift, and you should use an external rod lock or pilot check valve for holding. The adjustable air cushion at both ends only decelerates the piston near the end of the stroke to reduce shock. The -S magnet allows CMSG, DMSG, and EMSG sensors to detect position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X600SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.