Airtac MIC Cushioned Mini Cylinder MIC25X600SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X600SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X600SU
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles long 600 mm travel. Because the stroke exceeds the 500 mm standard catalog limit for this bore, it is supplied as a non-standard, made-to-order unit. The adjustable air cushion at both ends lets you dial in a needle valve to absorb high-speed end-of-stroke impact, protecting your payload while reducing noise. A built-in piston magnet enables position sensing.
The stainless barrel and rod resist mild corrosion and washdown environments. It uses a 1/8 inch port and an M10x1.25 male rod thread. With a 245.3 N push force, it offers a safe working load of about 147 N, lifting roughly 12.5 kg vertically with a 2:1 safety margin. The U-style 90-degree rear cover provides flexible mounting orientation for your space constraints.
Airtac MIC Cushioned Mini Cylinder MIC25X600SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X600SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X600SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X600SU Is Used
Long-Reach Diverting
Uses the 600 mm stroke to push heavy cartons across transfer lines, relying on the adjustable cushion to stop the 245 N thrust smoothly without jarring the belt.
Vertical Flap Folding
Lifts approximately 12.5 kg of packaging material vertically, using the U-style rear cover for stable 90-degree mounting and the -S magnet to confirm flap position.
High-Speed Sorting
Handles rapid product sorting where the stainless build resists humidity, while the needle-set air cushion absorbs the repeated shock of high-cycle actuation.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X600SU the Right Cylinder?
When sizing this 25 mm bore, stepping down to an MIC20 drops the 0.5 MPa push force to 157 N, while stepping up to an MIC32 raises it to 402 N. The adjustable air cushion is essential here because a 600 mm stroke can build significant momentum; the needle-set deceleration prevents harsh slamming at high speeds. Remember that the cushion only slows the piston near the end of travel and does not act as a brake. If you need to hold a load vertically during air loss, add an external rod lock or pilot check valve.
This SKU includes the -S magnet, allowing you to mount CMSG, DMSG, or EMSG switches for electronic or reed sensing. It drops into standard ISO 6432 mini-cylinder mounting brackets and clevises. You can pair it with LB foot, FA flange, SDB pivot, or TC trunnion hardware to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X600SU FAQ
This 25 mm bore cylinder uses a 1/8 inch port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical maximum force of 50 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and is not a locking brake. The piston will drift if air is lost. To maintain position, you must install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X600SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.