Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 60mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles demanding 60 mm stroke tasks. The defining feature of the MIC series is the adjustable air cushion at both ends, allowing you to tune a needle valve to absorb end-of-stroke shock at high speeds, protecting your payload and reducing noise compared to fixed bumper models. The stainless barrel and rod resist mild corrosion and washdown environments. Because this is a 25 mm bore, it conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises.
This specific configuration includes a built-in piston magnet (the -S suffix), enabling direct mounting of CMSG, DMSG, or EMSG reed and electronic sensors for position confirmation. It features a U-type back cover for 90-degree port orientation and comes with a TC trunnion mount. Operating at speeds from 30 to 800 mm/s, it provides a safe working load of roughly 147 N (about 60% of its 0.5 MPa push force) and lifts about 12.5 kg vertically with a 2:1 safety margin. The air port is 1/8" and the male rod thread is M10x1.25.
Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC Is Used
High-Speed Diverting
Uses the 245 N thrust and tuned end-cushions to rapidly push parcels off a belt without slamming, leveraging the TC trunnion for smooth pivot action.
Carton Flap Folding
Cycles at up to 800 mm/s to fold heavy cardboard flaps, relying on the adjustable needle to soften the impact and prevent crushing the packaging.
Lab Sample Handling
The stainless construction withstands wipe-down chemicals, while the 12.5 kg vertical lift capacity easily moves loaded sample racks between stations.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC the Right Cylinder?
When sizing this 25 mm bore, stepping down to a 20 mm MIC drops the 0.5 MPa push force to 157 N, while stepping up to a 32 mm bore increases it to 402 N. Choose this 25 mm model when your application requires moving moderate loads at high cycling speeds where the adjustable air cushion is essential to prevent end-of-stroke impact. The TC trunnion bracket supplied with this unit is ideal for pivoting loads that require self-aligning angular movement.
Note that the adjustable cushion only decelerates the piston near the stroke end; it is not a brake. If your system loses air, the piston will drift, so you must add an external rod lock or pilot-operated check valve to hold a suspended load safely. This SKU includes the -S magnet for CMSG/DMSG/EMSG switches; a non-S SKU cannot accept sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC FAQ
This 25 mm bore cylinder has a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke and acts purely as a shock absorber, not a brake. If air is lost, the piston will drift. You must use an external rod lock or pilot check valve to hold a load vertically.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X60SUTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.