Airtac MIC Cushioned Mini Cylinder MIC25X650SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X650SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 650mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke650 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X650SCA
Engineered for high-speed actuation, the AirTAC MIC25X650SCA is a double-acting, round-body stainless-steel mini cylinder featuring a needle-set adjustable air cushion at both ends. This cushioning absorbs end-of-stroke shock, protecting your payload while cutting operating noise. The stainless barrel and rod provide mild corrosion resistance for washdown or humid settings. A built-in magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches.
Delivering 245.3 N of push force at 0.5 MPa, this ISO 6432 mounting-interface unit handles a safe working load of roughly 147 N. It lifts about 12.5 kg vertically with a 2:1 safety margin. The 650 mm stroke is a non-standard made-to-order length exceeding the 500 mm maximum, and the rear CA pivot cover simplifies clevis mounting. The 1/8" port and M10x1.25 male rod thread match standard Ø25 mini-cylinder hardware.
Airtac MIC Cushioned Mini Cylinder MIC25X650SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X650SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 650 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X650SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X650SCA Is Used
Vertical Material Lift
Lowers a 12 kg guided fixture smoothly over 650 mm. The adjustable air cushion prevents harsh bottoming, while the CA pivot handles side play.
High-Speed Divert Gate
Snaps a sorting flap at high cycle rates. The needle-set cushion absorbs the shock, protecting the stainless rod from fatigue.
Carton Push-Off
Strokes 650 mm to push cartons off a washdown line. The stainless build resists moisture, and the 245.3 N push force clears jams.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X650SCA the Right Cylinder?
When sizing this unit, consider the next bore down and up. A Ø20 MIC bore yields 157 N push at 0.5 MPa, whereas a Ø32 bore provides 402 N—use the larger bore if your friction or pressure drops are uncertain. The adjustable air cushion is essential here; at high speeds over a 650 mm stroke, decelerating the load prevents impact damage. Note that this cushion only decelerates near the stroke end and does not lock the piston. If your application must hold a load vertically during air loss, install an external rod lock or pilot check valve.
The -S magnet allows CMSG, DMSG, or EMSG sensors to track position. For mounting, you can pair the CA rear pivot with LB foot, FA flange, SDB pivot-block, or TC trunnion brackets. Related types include the MI bumper version, MID double rod, and MIJ adjustable stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X650SCA FAQ
This double-acting cylinder has a 25 mm bore, a 1/8" port, and a 650 mm non-standard stroke. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, 343.4 N push and 288.5 N pull at 0.7 MPa, with a theoretical max of 50 kgf at 1.0 MPa.
No. The adjustable air cushion only decelerates the piston near the stroke end; it is not a brake. For vertical load holding during air loss, you must use an external rod lock or pilot-operated check valve. The -S magnet works with CMSG/DMSG/EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X650SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.