Airtac MIC Cushioned Mini Cylinder MIC25X65CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X65CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 65mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X65CA
Tame high-speed end-of-stroke shock with the AirTAC MIC25X65CA, a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild washdown resistance. A needle-set adjustable air cushion at both ends absorbs kinetic energy, protecting your payload far better than a fixed rubber bumper. It conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises.
In the 25 mm bore class, this actuator generates 245.3 N of push and 206.1 N of pull at 0.5 MPa, peaking at a 50 kgf theoretical maximum. That translates to a safe working load of roughly 147 N, letting you lift about 12.5 kg vertically with a 2:1 safety margin. The unit features a 1/8" port, an M10x1.25 male rod thread, and a CA rear pivot cover. Note this SKU lacks the -S magnet, so it cannot host CMSG, DMSG, or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC25X65CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X65CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 65 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X65CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X65CA Is Used
High-Speed Diverting
Uses the 245 N thrust to push parcels off a belt at speed, relying on the adjustable air cushion to stop the rod smoothly without slamming.
Pivot Actuation
Leverages the CA rear clevis mount to swing a lightweight guard or gate, absorbing rotational inertia at the stroke ends.
Flap Folding
Drives a cardboard flap folder where the stainless rod resists light moisture and the needle cushion prevents crushing the carton.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X65CA the Right Cylinder?
When sizing this 25 mm bore, step down to the MIC20 (157 N push @0.5 MPa) for lighter tooling, or move up to the MIC32 (402 N push @0.5 MPa) if you need extra thrust. The adjustable air cushion is essential when running at high speeds or moving heavy masses, letting you dial in deceleration to prevent mechanical banging. The CA pivot mount excels in articulating linkages.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Because this specific SKU has no magnet, position sensing is impossible without switching to the -S variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X65CA FAQ
This 25 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It delivers 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet. To use CMSG, DMSG, or EMSG switches, you must purchase the -S variant. The adjustable air cushion at both ends functions only to decelerate the load near the stroke end, not to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X65CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.