Airtac MIC Cushioned Mini Cylinder MIC25X65SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X65SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 65mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke65 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X65SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder is built for demanding actuation. The Ø25 mm bore features a 1/8" port and a M10x1.25 male rod thread. It conforms to the ISO 6432 mounting interface, ensuring easy integration into standard mini-cylinder brackets and clevises.
Unlike standard bumper models, the MIC series incorporates an adjustable air cushion at both ends. By turning a needle valve, you tune the deceleration to absorb high-speed end-of-stroke shock, protecting the load and reducing noise. The built-in -S magnet supports CMSG, DMSG, and EMSG sensors for position detection, while the stainless barrel and rod resist mild corrosion. Based on the 0.5 MPa push force, it handles a safe working load of roughly 147 N, lifting about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X65SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X65SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 65 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X65SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X65SCA Is Used
Package Diverting
Uses the 245.3 N push force to push parcels at high speed onto adjacent lines, relying on the adjustable air cushion to prevent harsh end-of-stroke impacts.
Carton Sealing
Cycles rapidly to fold and seal flaps, where the needle-set cushioning smoothly decelerates the rod to protect lightweight packaging materials.
Parts Ejection
Ejects finished components from a press area, using the ISO 6432 standard mount and CA clevis to integrate seamlessly into existing fixtures.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X65SCA the Right Cylinder?
When sizing this 245.3 N (at 0.5 MPa) unit, consider the adjacent bores: stepping down to the Ø20 MIC yields 157.0 N, while stepping up to the Ø32 MIC provides 402.2 N. Choose this Ø25 model when your application requires moderate force combined with high-speed cycling where the adjustable dual-end air cushion is essential to prevent impact damage. The CA rear pivot cover suits clevis mounting requirements.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If the pneumatic supply drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X65SCA FAQ
This double-acting cylinder uses a 1/8" port and generates 245.3 N push and 206.1 N pull at 0.5 MPa. At 0.7 MPa, it outputs 343.4 N push and 288.5 N pull. The theoretical maximum force is 50 kgf at 1.0 MPa.
The adjustable air cushion only decelerates the piston near the stroke end and does not lock or hold the load; you need an external rod lock or pilot check valve to prevent drifting on air loss. The -S magnet allows CMSG, DMSG, and EMSG switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X65SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.