Airtac MIC Cushioned Mini Cylinder MIC25X700SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X700SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 700mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke700 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X700SCM
Engineered for high-velocity actuation, the AirTAC MIC25X700SCM relies on a needle-set variable air cushion at both ends to decelerate the piston smoothly, eliminating the harsh impact typical of fixed-bumper mini cylinders. This double-acting, round-body stainless steel unit conforms to the ISO 6432 mounting interface for Ø8-Ø25 bores, dropping directly into standard mini brackets and clevises. The 700 mm stroke is a non-standard, made-to-order length that exceeds the 500 mm maximum standard for this bore.
The stainless barrel and rod resist mild corrosion and washdown environments. At 0.5 MPa it generates 245.3 N of push force and 206.1 N of pull, yielding a safe working load of roughly 147 N or a vertical lift of about 12.5 kg with a 2:1 margin. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, and EMSG position switches, while the CM round rear cover provides specific port and mounting orientation. Air connects via a 1/8" port.
Airtac MIC Cushioned Mini Cylinder MIC25X700SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X700SCM |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 700 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X700SCM
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X700SCM Is Used
High-Speed Diverting
Uses the 245.3 N push force to deflect packages on a conveyor, with the adjustable air cushion absorbing the shock of rapid direction changes over the long 700 mm travel.
Film Roll Feeding
Extends smoothly to feed packaging material, relying on the needle-set deceleration to prevent tearing when the piston reaches the end of its 700 mm stroke.
Vertical Lift Gate
Lifts a light 12.5 kg access panel vertically, utilizing the built-in -S magnet to confirm the fully open and closed positions via CMSG or DMSG sensors.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X700SCM the Right Cylinder?
When sizing this 25 mm bore, stepping down to an MIC20 yields 157 N of push at 0.5 MPa, whereas stepping up to an MIC32 provides 402 N. Choose this 25 mm class when you need moderate force combined with high-speed cycling where the adjustable end cushions are essential to protect the mechanism. Because the 700 mm stroke exceeds the 500 mm standard catalog maximum, expect a made-to-order lead time.
Remember that the air cushion only decelerates the load near the stroke end; it does not function as a lock or brake. If air pressure drops, the piston will drift, so fit an external rod lock or pilot-operated check valve to hold a suspended load. Beyond the CM rear cover, you can mount the cylinder using LB foot, FA flange, SDB pivot, or TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X700SCM FAQ
This double-acting cylinder uses a 1/8" port and operates at speeds from 30 to 800 mm/s. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and the pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
It features a variable air cushion at both ends that you tune with a needle valve to absorb end-of-stroke shock. The -S suffix means it has a built-in piston magnet ready for CMSG, DMSG, or EMSG electronic switches. The cushion only decelerates the load and is not a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X700SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.