Airtac MIC Cushioned Mini Cylinder MIC25X75CA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X75CA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X75CA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless-steel round-body mini cylinder is built for demanding actuation. The Ø25 bore conforms to the ISO 6432 mounting interface, dropping directly into standard mini brackets and clevises. A rear CA clevis cover provides specific pivot mounting, while the 1/8" port supplies air efficiently.
Unlike fixed bumper models, the MIC series features an adjustable air cushion at both ends. Turning the cushion needle lets you tune end-of-stroke deceleration, soaking up high-speed shock to protect the load and cut noise. With a 0.5 MPa push force, it handles a safe working load of about 147 N, lifting roughly 12.5 kg vertically with a 2:1 margin. Note this SKU lacks a magnet, so it cannot take CMSG, DMSG or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC25X75CA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X75CA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X75CA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X75CA Is Used
Package Diverting
Pivots light diverters at high speed on packaging lines. The adjustable air cushion absorbs the end-of-stroke shock, preventing the 245 N force from slamming the mechanism.
Small Press Ejection
Pushes finished parts out of a light press. The CA rear clevis allows angled ejection, while the stainless build resists mild coolant splash during operation.
Vertical Lift Gates
Raises small access gates weighing up to 12.5 kg. The needle-set cushion ensures the gate slows smoothly at the top without a hard mechanical impact.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X75CA the Right Cylinder?
When sizing this 75 mm stroke unit, consider stepping down to the MIC20 bore if your load is lighter, as it provides 157 N of push at 0.5 MPa. If your application requires more force, the larger MIC32 bore offers 402 N at the same pressure. The adjustable cushion matters most when operating near the 800 mm/s speed limit or moving heavy masses, preventing harsh impacts. Because this specific SKU lacks the -S magnet, position sensing is impossible; you must select an -S variant to use CMSG, DMSG or EMSG switches.
For mounting flexibility beyond the built-in CA rear clevis, you can utilize LB foot, FA flange, SDB pivot-block, or TC trunnion brackets. Remember that the air cushion only decelerates the piston near stroke end; it does not act as a brake. If the pneumatic supply drops, the piston will drift. To hold a load securely on air loss, install an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X75CA FAQ
This double-acting cylinder uses a 1/8" air port. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push is 343.4 N and the pull is 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not have a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must purchase the -S magnet variant for sensing. The stainless round-body build resists mild corrosion, and the needle-adjustable air cushion at both ends only decelerates the load; it does not lock position on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X75CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.