Airtac MIC Cushioned Mini Cylinder MIC25X75SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X75SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X75SCA
Delivering 245.3 N of push force at 0.5 MPa, the AirTAC MIC25X75SCA is a double-acting, round-body stainless-steel mini cylinder built for demanding motion tasks. It features an adjustable air cushion at both ends, allowing you to tune the needle valve to absorb high-speed end-of-stroke shock, protecting your payload while reducing noise. The stainless barrel and rod resist mild corrosion and washdown environments. Because this is a 25 mm bore, it conforms to the ISO 6432 mounting interface, dropping directly into standard mini-cylinder brackets and clevises.
The integrated -S piston magnet enables position sensing with CMSG, DMSG, or EMSG switches, while the CA back cover provides a rear pivot mount for articulating loads. Operating at speeds from 30 to 800 mm/s on a 1/8" port, this unit offers a safe working load of roughly 147 N. That translates to lifting about 12.5 kg vertically with a 2:1 safety margin, making it highly capable for mid-range actuation.
Airtac MIC Cushioned Mini Cylinder MIC25X75SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X75SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X75SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X75SCA Is Used
High-Speed Diverter
Uses the 245.3 N push force to deflect packages on a conveyor, relying on the adjustable air cushion to silently stop the 75 mm stroke at high cycle rates without slamming.
Pneumatic Clamping Arm
Secures cardboard cartons during sealing. The CA rear pivot allows the arm to swing naturally, while the -S magnet confirms clamp position via a DMSG sensor.
Vertical Lift Gate
Raises a 12 kg access panel using the 0.5 MPa thrust, with the stainless construction holding up against ambient humidity in storage facilities.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X75SCA the Right Cylinder?
When sizing this 25 mm bore unit, consider stepping down to a MIC20 bore if your payload is lighter, which provides 157 N of push at 0.5 MPa. If your application requires more muscle, moving up to a MIC32 bore yields 402.2 N of push force at the same pressure. The adjustable air cushion on the MIC25X75SCA is essential when operating at high speeds or moving heavy loads, as it prevents harsh impacts that a standard bumper cannot absorb.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake or lock. If the pneumatic supply drops, the cylinder will drift and cannot hold its load. For suspended or vertical loads that require fail-safe holding, add an external rod lock or a pilot-operated check valve. You can mount this unit using LB foot, FA flange, SDB pivot, or TC trunnion hardware to suit your frame.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X75SCA FAQ
This double-acting cylinder uses a 1/8" air port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
Yes, the -S suffix means it has a built-in piston magnet compatible with CMSG, DMSG, and EMSG switches. The adjustable air cushion at both ends uses a needle valve to trap exhaust air, decelerating the piston to prevent end-of-stroke shock. It is a dampener, not a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.