Airtac MIC Cushioned Mini Cylinder MIC25X75SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X75SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 75mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X75SU
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles demanding cycles. A needle-set adjustable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload and cutting workshop noise. The 25 mm bore features a 1/8" port and an M10x1.25 male rod thread.
The built-in piston magnet (-S) supports CMSG, DMSG and EMSG switches for precise position sensing, while the U-style 90-degree rear cover simplifies compact mounting. With a safe working load of roughly 147 N, it lifts about 12.5 kg vertically using a 2:1 safety margin. The stainless barrel and rod resist mild corrosion and washdown environments.
Airtac MIC Cushioned Mini Cylinder MIC25X75SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X75SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X75SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X75SU Is Used
Package Diverting
Pushes small to mid-weight cartons at 800 mm/s, relying on the adjustable air cushion to stop the 245 N stroke without slamming the frame.
Filler Head Actuation
Cycles a filling nozzle vertically with the U-style rear cover, lifting roughly 12.5 kg loads while the stainless rod resists washdown.
Parts Ejection
Ejects machined components quickly from a fixture, using the needle-set cushion to decelerate the payload before it hits the stop.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X75SU the Right Cylinder?
For lighter duties, the MIC20X50 provides 157 N of push at 0.5 MPa; if you need more muscle, the MIC32X75 steps up to 402 N. Choose this 25 mm bore when moving moderate masses at high speeds, as the adjustable air cushion prevents harsh impacts. The cushion only decelerates the piston near stroke end and does not lock the load.
If air pressure drops, the rod will drift, so fit an external rod lock or pilot check valve for holding. It uses the ISO 6432 mounting interface for standard brackets and clevises. Select the -S magnet option here to enable CMSG/DMSG/EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X75SU FAQ
At 0.5 MPa it pushes 245.3 N and pulls 206.1 N. At 0.7 MPa it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. This 25 mm bore cylinder uses a 1/8" port and a 10 mm rod with an M10x1.25 male thread.
No. The adjustable air cushion only decelerates the piston near the end of the stroke and acts as a brake. If air pressure drops, the rod will drift downward. You must add an external rod lock or pilot-operated check valve to hold a suspended load safely.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X75SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.