Airtac MIC Cushioned Mini Cylinder MIC25X80SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X80SU is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X80SU
Designed for high-speed actuation, the AirTAC MIC25X80SU relies on a needle-set variable air cushion at both ends to decelerate the piston smoothly, eliminating the end-of-stroke bang typical of fixed bumpers. This double-acting, round-body stainless steel mini cylinder features a 25 mm bore, an 80 mm stroke, and a U-style 90-degree rear cover for flexible port and mounting orientation.
Delivering 245.3 N of push force at 0.5 MPa, it provides a safe working load of roughly 147 N and lifts about 12.5 kg vertically with a 2:1 safety margin. The stainless barrel and rod resist mild corrosion and washdown environments. Because this SKU includes the -S magnet, it directly supports CMSG, DMSG, and EMSG position switches. It uses a 1/8" port, conforms to the ISO 6432 mounting interface for standard mini brackets, and accepts a male M10x1.25 rod thread.
Airtac MIC Cushioned Mini Cylinder MIC25X80SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X80SU |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X80SU
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X80SU Is Used
Package Diverting
Handles high-speed package diverting on conveyors where the adjustable air cushion absorbs the 12.5 kg vertical lift impact smoothly without jarring the mechanism.
Carton Sealing
Drives carton sealing flaps at rapid cycles; the stainless build resists washdown, while the needle-set cushion prevents flap tearing at stroke end.
Component Sorting
Pushes small metal components into bins using 245.3 N of force, relying on the ISO 6432 mounting interface for easy drop-in bracket replacement.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X80SU the Right Cylinder?
When sizing this 25 mm bore, stepping down to the MIC20 yields 157.0 N of push at 0.5 MPa, while stepping up to the MIC32 provides 402.2 N. Choose this 25 mm model when your application requires 245.3 N of push and operates at high speeds where the adjustable needle cushion is essential to protect the load from shock. The cushion only decelerates the piston near the stroke end; it does not function as a brake. If the mechanism must hold position during air loss, install an external rod lock or pilot-operated check valve.
The U-style back cover simplifies 90-degree mounting configurations. You can pair this -S magnet version with CMSG, DMSG, or EMSG sensors for precise end-of-stroke detection. Standard mounting accessories include LB foot, FA flange, SDB pivot-block, and TC trunnion options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X80SU FAQ
This double-acting cylinder pushes 245.3 N and pulls 206.1 N at 0.5 MPa. At 0.7 MPa, it pushes 343.4 N and pulls 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa. It uses a 1/8" port, a 10 mm rod, and an M10x1.25 male rod thread.
No, the adjustable air cushion only decelerates the piston near the end of the stroke; it is not a lock or brake, and the piston will drift if air pressure is lost. Use an external rod lock for holding. The -S designation means it has a built-in magnet for CMSG, DMSG, and EMSG position switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X80SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.