Airtac MIC Cushioned Mini Cylinder MIC25X80U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X80U is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 80mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X80U
Tuned for rapid cycling, the AirTAC MIC25X80U relies on a needle-set variable air cushion at both ends to decelerate the piston smoothly, eliminating the harsh impact typical of bumper-only mini cylinders. This double-acting, round-body stainless steel unit conforms to ISO 6432 mounting dimensions, dropping directly into standard mini-cylinder brackets and clevises.
The Ø25 mm bore generates 245.3 N of push force and 206.1 N of pull force at 0.5 MPa, peaking at a theoretical 50 kgf at 1.0 MPa. With a practical safe working load of roughly 147 N, it lifts about 12.5 kg vertically under a 2:1 safety margin. This specific SKU lacks the -S magnet and cannot accept CMSG, DMSG or EMSG sensors, while the U rear cover provides a 90-degree port and mounting orientation.
Airtac MIC Cushioned Mini Cylinder MIC25X80U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X80U |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X80U
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X80U Is Used
Package Diverting
Uses the 245 N push force to deflect medium-weight cartons on a high-speed sorting line, relying on the adjustable air cushion to silently stop the 80 mm stroke without jarring the mechanism.
Clamshell Sealing
Provides consistent downward pressure for plastic container sealing, where the U rear cover allows a compact 90-degree fitting orientation in a tight packaging cell.
Parts Ejection
Ejects machined metal components weighing up to 12.5 kg from a fixture, using the stainless steel construction to resist mild washdown spray and shop-floor coolant.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X80U the Right Cylinder?
When sizing this 80 mm stroke model, stepping down to the MIC20 bore drops the 0.5 MPa push force to 157 N, whereas stepping up to the MIC32 raises it to 402 N. The adjustable air cushion proves essential when driving heavier masses at high speeds, as the needle valve precisely damps end-of-stroke kinetic energy without relying on a fixed bumper.
Because this non-magnetic SKU cannot host position switches, routing and sequencing must be handled externally. Furthermore, the air cushion only decelerates the load near the stroke ends; it does not function as a brake. To prevent drift upon air loss or valve centering, fit an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X80U FAQ
This double-acting cylinder uses a 1/8" air port and an M10x1.25 male rod thread. At 0.5 MPa it pushes with 245.3 N and pulls with 206.1 N. At 0.7 MPa the push increases to 343.4 N and the pull to 288.5 N. The theoretical maximum force is 50 kgf at 1.0 MPa.
No, this specific SKU does not include the -S magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You must select the -S variant for position sensing. The variable air cushion at both ends functions only to decelerate the load near stroke end, not to hold position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X80U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.