Airtac MIC Cushioned Mini Cylinder MIC25X95SCA
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC25X95SCA is a genuine double acting + cushion round-body mini air cylinder with a Ø25mm bore and 95mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments. Its ISO 6432 mounting interface makes it a compact drop-in for standard mini-cylinder fixtures.
- BoreØ25 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC25X95SCA
Delivering 245.3 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles demanding 95 mm stroke tasks. The Ø25 bore features a 1/8 inch port and an M10x1.25 male rod thread. Because it carries the -S suffix, a built-in piston magnet enables position sensing with CMSG, DMSG, or EMSG switches. The rear CA clevis cover provides a robust pivot mount for articulating loads.
Unlike standard bumper models, the MIC series integrates a needle-adjustable air cushion at both ends. This allows you to tune the end-of-stroke deceleration, effectively absorbing high-speed shock, lowering noise, and protecting the payload. The stainless barrel and rod resist mild corrosion and washdown environments. With a safe working load of roughly 147 N, it lifts about 12.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC25X95SCA Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC25X95SCA |
|---|---|
| Series | MIC ISO 6432 mini cylinder |
| Bore size | Ø25 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 245 N | 206 N |
| 0.7 MPa | 344 N | 289 N |
| Max (@1.0 MPa) | 50 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC25X95SCA
| MIC | ISO 6432 round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 25 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC25X95SCA Is Used
High-Speed Diverter
Rapidly sorts packages on a belt line. The adjustable air cushion softly stops the 95 mm stroke at high speed, preventing damage to lightweight goods.
Carton Flap Folder
Folds heavy cardboard flaps prior to sealing. The 245.3 N push force easily overcomes stiffness, while the stainless build resists dusty warehouse environments.
Pivoting Component Loader
Uses the CA clevis to swing parts into a machining fixture. The needle-set cushion absorbs the rotational shock of moving metal components at cycle end.
Is the Airtac MIC Cushioned Mini Cylinder MIC25X95SCA the Right Cylinder?
When sizing this 245.3 N push unit, stepping down to the MIC20 drops force to 157.0 N, while moving up to the MIC32 increases it to 402.2 N at 0.5 MPa. The adjustable cushion is essential if you are cycling near the 800 mm/s maximum with heavy tooling, as it prevents harsh impacts. Note that the cushion only decelerates the piston near the stroke end; it does not function as a brake. If the application must hold a load during air loss or valve centering, fit an external rod lock or pilot check valve to prevent drift.
This SKU drops directly into standard mini-cylinder brackets thanks to its ISO 6432 mounting interface. Along with the CA clevis, you can utilize LB foot, FA flange, SDB pivot, or TC trunnion mounts. Position feedback requires the included -S magnet paired with CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC25X95SCA FAQ
This double-acting cylinder uses a 1/8 inch port and an M10x1.25 male rod thread. It generates 245.3 N push and 206.1 N pull at 0.5 MPa, increasing to 343.4 N push and 288.5 N pull at 0.7 MPa. The theoretical maximum force is 50 kgf at 1.0 MPa.
The -S suffix indicates a built-in piston magnet for use with CMSG, DMSG, or EMSG sensors. The adjustable air cushion only decelerates the piston near stroke end; it is not a brake. For vertical loads, the piston will drift on air loss, so you must install an external rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC25X95SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.