Airtac MIC Cushioned Mini Cylinder MIC32X100SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X100SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 100mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke100 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X100SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X100SU is a double-acting round-body mini cylinder built for demanding motion tasks. It features a 32 mm bore, a 100 mm stroke, and a 1/8 inch air port. The stainless-steel barrel and piston rod supply reliable mild corrosion resistance for washdown or humid settings. A U-style 90-degree rear cover provides flexible mounting orientation.
Unlike standard bumper models, this unit incorporates an adjustable air cushion at both ends. You can tune the needle valve to decelerate heavy loads smoothly at high speeds, reducing end-of-stroke shock and noise. With a safe working load of roughly 241 N, it can vertically lift about 20.5 kg with a 2:1 safety margin. The integrated -S magnet allows direct mounting of CMSG, DMSG, or EMSG sensors for position detection.
Airtac MIC Cushioned Mini Cylinder MIC32X100SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X100SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 100 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X100SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X100SU Is Used
Package Diverting
Handles moderate carton weights on high-speed sorting lines where the adjustable air cushion prevents harsh slamming during rapid direction changes.
Light Pressing
Applies steady 402.2 N clamping force for small component seating, using the 1/8 inch port for rapid actuation and responsive cycle times.
Vertical Lifting
Raises goods up to 20.5 kg with a 2:1 safety margin, relying on the stainless build to withstand humid storage environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X100SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to a MIC25X100S drops the 0.5 MPa push force to 245.3 N, while stepping up to a MIC40X100S increases it to 628.3 N. Choose this 32 mm model when moving moderate masses at high velocities, as the adjustable air cushion is essential for absorbing kinetic energy without slamming. Speeds range from 30 to 800 mm/s.
Remember that the cushion only decelerates the piston near the stroke end; it does not function as a brake. If your application must hold a load vertically during air loss, add an external rod lock or pilot-operated check valve. The U back cover and -S magnet option give you immediate sensor compatibility and 90-degree mounting flexibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X100SU FAQ
This 32 mm bore cylinder features a 1/8 inch air port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The -S suffix means it has a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end to reduce shock; it is not a lock. You need an external rod lock or pilot check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X100SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.