Airtac MIC Cushioned Mini Cylinder MIC32X10CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X10CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X10CM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X10CM is a double-acting round-body mini cylinder built for rapid cycling. It features a 10 mm stroke and a CM round rear cover for clean port orientation. The stainless-steel barrel and rod resist mild corrosion, making it suitable for washdown environments.
A defining trait of this series is the adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to absorb shock at high speeds, protecting the load and cutting noise. This SKU lacks a magnet, so it cannot take a magnetic switch; choose the -S variant for CMSG, DMSG or EMSG sensors. With a safe working load of about 241 N, it lifts roughly 20.5 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC32X10CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X10CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X10CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X10CM Is Used
Short-Stroke Ejector
Uses the 402.2 N push force to knock parts out of a fixture quickly, relying on the tuned cushion to stop the rod cleanly over 10 mm.
High-Speed Diverter
Snaps product across a belt in rapid cycles where the adjustable air cushion absorbs the shock of sudden direction changes.
Flap Tamping Unit
Presses carton flaps with a 241 N safe working load, using the stainless construction to endure occasional washdowns.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X10CM the Right Cylinder?
For sizing context, stepping down to the MIC25 yields 245.3 N push at 0.5 MPa, while the larger MIC40 provides 628.3 N. The Ø32 bore here hits a strong middle ground for compact automation. The adjustable cushion matters most when driving heavier masses at high speed, as it prevents harsh impact over the short 10 mm travel. Note that the cushion only decelerates the piston near the stroke end; it does not hold position. If you need to prevent drift on air loss, fit an external rod lock or pilot check valve. This base model has no magnet and cannot support sensors, and it uses a 1/8" port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X10CM FAQ
This double-acting cylinder uses a 1/8" port and a Ø12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
This specific SKU has no magnet and cannot accept a sensor; you need the -S version for CMSG/DMSG/EMSG switches. The adjustable air cushion at both ends uses a needle to regulate deceleration, reducing shock at high speeds, but it acts only as a damper and not a load-holding brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X10CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.