Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC
Delivering 563 N of push force at 0.7 MPa, the AirTAC MIC32X10SCMTC is a robust round-body mini cylinder built for demanding actuation. It features a double-acting stainless-steel barrel and piston rod that shrugs off mild corrosion and washdown environments. A built-in magnet (-S) enables precise position sensing with CMSG, DMSG, or EMSG switches. This configuration includes a CM round rear cover and a TC trunnion mount for pivot-style installations.
Unlike standard bumper units, this model uses a needle-set variable air cushion at both ends to decelerate the load smoothly at high speeds, protecting your machinery from end-of-stroke shock. Operating at 30-800 mm/s, it provides a safe working load of about 241 N, capable of lifting roughly 20.5 kg vertically with a 2:1 safety margin. The 1/8" port and M10x1.25 male rod thread ensure solid pneumatic and mechanical connections for heavy-duty tasks.
Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC Is Used
High-Speed Diverter
Uses the 563 N push force to rapidly deflect heavy packages on a sorting line, relying on the adjustable air cushion to silently absorb the 10 mm stroke impact.
Clamp Actuation
Secures stainless steel workpieces during machining, taking advantage of the corrosion-resistant round-body build and the 241 N safe working load for firm holding.
Pallet Stopper
Halts incoming pallets on a gravity roller conveyor; the TC trunnion mount handles the side loads while the needle-set cushion prevents jarring stops.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC the Right Cylinder?
When sizing this 32 mm bore unit, consider stepping down to the MIC25 (219.8 N push @0.5 MPa) for lighter loads, or stepping up to the MIC40 (628.3 N push @0.5 MPa) if you need substantially more thrust. The adjustable cushion is essential when operating at high speeds or moving heavy payloads, as it absorbs kinetic energy that would otherwise jar the assembly. For vertical or suspended loads, remember that the cushion only decelerates near the stroke end and does not act as a brake; you must add an external rod lock or pilot check valve to prevent drifting on air loss. The TC trunnion mounting pairs perfectly with the -S magnet for responsive sensor feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC FAQ
This double-acting 32 mm bore cylinder uses a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and is not a locking brake. If power drops, the piston will drift. For vertical loads, you must install an external rod lock or pilot-operated check valve. The -S magnet allows CMSG/DMSG/EMSG sensors to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X10SCMTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.