Airtac MIC Cushioned Mini Cylinder MIC32X110SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X110SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X110SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles demanding cycles. The Ø32 bore operates on a 1/8 inch port with a 12 mm rod, yielding a safe working load near 241 N. It lifts about 20.5 kg vertically under a 2:1 safety margin.
Twin adjustable air cushions replace fixed bumpers, letting you needle-set the end-of-stroke deceleration to absorb shock at high travel speeds. The -S suffix equips the piston with a magnet for CMSG, DMSG or EMSG switches, while the CM round rear cover sets the port and mounting orientation. Stainless construction resists mild washdown corrosion.
Airtac MIC Cushioned Mini Cylinder MIC32X110SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X110SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X110SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X110SCM Is Used
Package Diverting
Shifts heavy cartons at speed where the 402.2 N push force handles the mass and the adjustable cushion prevents end-stop slamming.
Clamp Actuation
Secures dense metal workpieces during machining, using the 241 N safe working load to hold the part firmly against tooling forces.
Vertical Lift Gates
Raises access doors weighing up to 20.5 kg, relying on the needle-set cushion to soften the landing at the top of the 110 mm travel.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X110SCM the Right Cylinder?
For lighter duties, the Ø25 MIC bore pushes 245.3 N at 0.5 MPa; if you need more muscle, the Ø40 steps up to 628.3 N. Choose this Ø32 model when moving heavier masses at high speeds where the adjustable needle cushions actively dampen impact. The 110 mm stroke falls well within the 500 mm standard limit.
The air cushion only decelerates the load near the stroke ends and never acts as a lock. If gravity or air loss could cause the piston to drift, fit an external rod lock or pilot check valve. Mount via LB foot, FA flange, SDB pivot or TC trunnion, and use the internal magnet for electronic position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X110SCM FAQ
This double-acting cylinder uses a 1/8 inch port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and does not brake or lock the load. For vertical holding you need an external rod lock or pilot check valve. The -S magnet supports CMSG, DMSG and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X110SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.