Airtac MIC Cushioned Mini Cylinder MIC32X130SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X130SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 130mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke130 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X130SCM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X130SCM is a double-acting round-body mini cylinder built for demanding actuation. Its stainless-steel barrel and Ø12 mm piston rod shrug off mild corrosion and washdown environments, while the 1/8" port feeds the chamber efficiently. The CM round end cover provides a clean rear port orientation for tight machinery layouts.
What sets this unit apart is the needle-adjustable air cushion at both stroke ends. Rather than slamming into a fixed bumper, you can tune the deceleration to absorb high-speed kinetic energy, protecting your payload and dropping noise levels. Factoring a 2:1 safety margin, it lifts about 20.5 kg vertically, yielding a safe working load of roughly 241 N. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position sensing.
Airtac MIC Cushioned Mini Cylinder MIC32X130SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X130SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 130 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X130SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×130 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X130SCM Is Used
Package Diverters
Drives high-speed routing gates on packaging lines, using the adjustable cushion to softly stop the 130 mm stroke and prevent jarred parcels.
Light Press Fitting
Applies 402.2 N of push at 0.5 MPa to seat small bearings, with the needle cushion decelerating the tool head to avoid denting delicate components.
Material Handling Doors
Raises and lowers access doors weighing up to 20.5 kg, relying on the stainless build for humid warehouse environments and the magnet for position feedback.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X130SCM the Right Cylinder?
When sizing this 130 mm stroke unit, compare it against the adjacent bores in the range. Stepping down to the MIC25 yields 245.3 N of push at 0.5 MPa, whereas moving up to the MIC40 provides 628.3 N. Choose this Ø32 bore when your payload requires that middle-ground thrust, and specify the adjustable cushion specifically when operating at high speeds or moving heavy masses that would otherwise cause end-of-stroke impact.
Keep in mind the air cushion only decelerates the piston near the stroke ends; it does not function as a brake or lock. If your application must hold a load vertically during a loss of air pressure or a centered valve, install an external rod lock or a pilot-operated check valve. For mounting flexibility, pair the CM rear cover with LB foot, FA flange, SDB pivot, or TC trunnion brackets. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG switches for electronic positioning.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X130SCM FAQ
This double-acting cylinder uses a 1/8" air port and a Ø12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The needle-adjustable air cushion at both ends decelerates the piston near the stroke ends to absorb high-speed shock, but it is not a locking brake. The piston will drift on air loss, so for vertical loads you must add an external rod lock or pilot check valve. The -S magnet allows CMSG, DMSG, or EMSG sensors to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X130SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.