Airtac MIC Cushioned Mini Cylinder MIC32X150SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X150SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 150mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X150SCM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X150SCM is a double-acting round-body mini cylinder built for demanding actuation. It features a stainless-steel barrel and piston rod that resist mild corrosion and washdown environments. A 1/4" port supplies the 32 mm bore, driving a 12 mm rod with an M10x1.25 male thread over a 150 mm stroke. The CM round rear cover provides a compact, clean mounting footprint for tight machinery.
The defining feature of this build is the adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to absorb high-speed shock, protecting the load and cutting noise far better than a fixed bumper. For sizing, this yields a safe working load of roughly 241 N, meaning it lifts about 20.5 kg vertically with a 2:1 safety margin. The -S suffix equips the piston with a magnet for CMSG, DMSG, or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC32X150SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X150SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X150SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X150SCM Is Used
Package Diverting
Handles moderate carton masses on sorting lines where the needle-tuned cushions silently absorb the 150 mm stroke impact at high speed.
Light Pressing
Applies up to 402.2 N of push force for seating small bearings or pins, using the adjustable end cushion to prevent workpiece damage.
Vertical Lift Gates
Raises access flaps or light barriers; the stainless build resists warehouse humidity while the cushion softens the top stop.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X150SCM the Right Cylinder?
When sizing this 32 mm bore, dropping down to the MIC25X50 yields 245.3 N push at 0.5 MPa, while stepping up to the MIC40X50 provides 628.3 N. Choose this 402.2 N model when moving moderate masses at high cycling speeds where the adjustable needle cushions actively prevent harsh end-of-stroke impacts. The 1/4" port and 30-800 mm/s speed range handle robust flow requirements.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If air pressure drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for suspended loads. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets, while the -S magnet enables solid-state or reed sensor tracking.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X150SCM FAQ
This 32 mm bore cylinder uses a 1/4" port and a 12 mm rod with an M10x1.25 thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The -S suffix provides a built-in piston magnet for CMSG, DMSG, and EMSG sensors. The adjustable air cushion only decelerates the piston near stroke end and does not lock the load; you must add an external rod lock or pilot check valve to prevent drifting on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X150SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.