Airtac MIC Cushioned Mini Cylinder MIC32X15CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X15CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 15mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X15CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work in tight spaces. The MIC32X15CM features a stainless-steel barrel and rod to resist mild corrosion and washdown environments. It carries a 1/4" port and an M10x1.25 male rod thread. A needle-set variable air cushion at both ends soaks up end-of-stroke shock at high speeds, protecting your payload and cutting noise better than a fixed bumper.
For sizing, this 32 mm bore yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin. This specific SKU ships without a magnet, meaning it cannot accept CMSG, DMSG, or EMSG sensors. The CM round rear cover provides a clean, compact mounting footprint for general automation tasks.
Airtac MIC Cushioned Mini Cylinder MIC32X15CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X15CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X15CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X15CM Is Used
Short-Stroke Clamping
Ideal for securing heavier metal or composite parts during machining, using its 402.2 N push force to hold firm over a 15 mm travel.
Package Diverting
Provides robust actuation for deflecting heavier cartons on a sorting line, where the adjustable cushion absorbs the rapid directional change.
Stainless Welding Jig
The stainless barrel and rod endure mild splatter and shop humidity while supplying 345.6 N of pull force to retract a welding fixture.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X15CM the Right Cylinder?
When upgrading from a 25 mm bore that tops out at 245.3 N push at 0.5 MPa, this 32 mm unit steps up to 402.2 N. If you need even more power, the 40 mm bore pushes 628.3 N. The adjustable air cushion is essential here if you are moving heavier loads at high speed, as it decelerates the piston smoothly. Remember that the cushion only slows the rod near stroke end; it is not a brake. To hold a load vertically on air loss, install an external rod lock or pilot check valve. Choose the -S magnet variant if you require position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X15CM FAQ
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You would need the -S variant for position sensing. The adjustable air cushion at both ends functions purely to decelerate the load, not to hold it.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X15CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.