Airtac MIC Cushioned Mini Cylinder MIC32X25SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X25SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X25SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles heavy-duty tasks with precision. The Ø32 bore operates on a 1/8 inch port and features a Ø12 mm piston rod with an M10x1.25 male thread. A built-in piston magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches.
Twin adjustable air cushions at both ends allow you to needle-set the deceleration, absorbing high-speed end-of-stroke shock to protect your payload and reduce noise. The stainless barrel and rod resist mild corrosion and washdown environments. For practical sizing, expect a safe working load around 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X25SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X25SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X25SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X25SCM Is Used
High-Speed Diverting
Handles the 402 N push required to rapidly divert heavier packages on a conveyor, using the adjustable cushion to stop the stroke smoothly without slamming.
Carton Sealing Press
Drives a sealing head with enough force for thick cardboard, relying on the stainless build to endure dusty or mildly humid packaging plant conditions.
Component Insertion
Pushes bearings or pins into housings at speed, where the needle-set cushion slows the rod just before contact to prevent damaging the 241 N working load.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X25SCM the Right Cylinder?
When sizing this 32 mm bore unit, dropping down to the MIC25X50 yields 245.3 N of push at 0.5 MPa, while stepping up to the MIC40X50 provides 628.3 N. Choose this Ø32 model when moving heavier masses at high speeds where the adjustable air cushion is essential to prevent harsh impacts. The CM round rear cover provides specific port and mounting orientation for your layout.
Remember that the air cushion only decelerates the piston near the stroke end; it does not act as a brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot-operated check valve for secure load holding. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, or EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X25SCM FAQ
This double-acting cylinder uses a 1/8 inch port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, the adjustable air cushion at both ends only decelerates the piston near the stroke end to reduce shock; it is not a brake or lock. The piston will drift if air pressure drops, so you must use an external rod lock or pilot check valve for load holding. The -S magnet allows CMSG, DMSG, or EMSG sensors to track position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X25SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.