Airtac MIC Cushioned Mini Cylinder MIC32X300SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X300SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 300mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke300 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X300SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles within a compact footprint. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. It features a 1/8 inch air port and a 300 mm stroke, making it a robust choice for mid-range automation. A CM round rear cover provides specific mounting and port orientation flexibility.
The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the deceleration to absorb end-of-stroke shock at high speeds, protecting the load and cutting noise. Based on the 0.5 MPa push rating, this bore yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin. The unit includes an -S magnet for CMSG, DMSG or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC32X300SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X300SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X300SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X300SCM Is Used
Package Diverting
Pushes medium-weight cartons off a high-speed belt line, using the adjustable cushions to stop the 300 mm stroke smoothly without jarring the goods.
Flap Folding
Drives cardboard flaps down on an automated case erector, handling the 402.2 N push requirement while the stainless build shrugs off dusty debris.
Pallet Loading
Indexing small components into a pallet fixture at speed, where the needle-set deceleration protects the tooling from impact damage.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X300SCM the Right Cylinder?
When sizing this 32 mm bore, stepping down to an MIC25X300 lowers the push force to 245.3 N at 0.5 MPa, while stepping up to an MIC40X300 raises it to 628.3 N. Choose this 32 mm model when moving loads near that 241 N safe working threshold at high travel speeds, where the adjustable needle cushions excel at smoothing stops. Note that the air cushion only decelerates the piston near the stroke end; it does not lock or hold position. If your process requires the load to stay put on air loss, add an external rod lock or a pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X300SCM FAQ
This double-acting cylinder has a 32 mm bore, a 300 mm stroke and a 1/8 inch air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke; it is not a brake or lock. The piston will drift on air loss. For vertical loads, you must use an external rod lock or pilot check valve. The -S magnet allows CMSG, DMSG and EMSG sensors for position tracking.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X300SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.