Airtac MIC Cushioned Mini Cylinder MIC32X30SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X30SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X30SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles. The stainless-steel barrel and piston rod resist mild corrosion and washdown environments. A variable air cushion at both ends allows needle adjustment to absorb high-speed end-of-stroke shock, protecting payloads and reducing noise.
Equipped with a 1/8" port and an M10x1.25 male rod thread, the unit yields a safe working load of roughly 241 N. It lifts about 20.5 kg vertically with a 2:1 safety margin. The -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG position switches. The CM round rear cover provides a compact mounting footprint for this non-ISO 32 mm bore size.
Airtac MIC Cushioned Mini Cylinder MIC32X30SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X30SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X30SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X30SCM Is Used
Package Diverting
Pushes heavier cartons at high speed onto secondary lines where the needle-set air cushion prevents end-of-stroke jarring that could topple goods.
Clamp Actuation
Provides 402.2 N of clamping thrust for securing parts during packaging, using the built-in -S magnet to confirm clamp position via DMSG sensors.
Light Pressing
Performs light assembly pressing tasks with a 241 N safe working load, relying on the stainless construction to endure mildly corrosive shop environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X30SCM the Right Cylinder?
When sizing this 32 mm bore, step down to the MIC25 (245.3 N push @0.5 MPa) for lighter loads, or step up to the MIC40 (628.3 N push @0.5 MPa) when you need more thrust. The adjustable cushion proves vital for high-speed strokes or moving heavy masses, letting you dial in deceleration to prevent impact damage.
The cushion only slows the piston near stroke end and does not act as a brake. If the application must hold a load vertically during air loss, add an external rod lock or pilot-operated check valve. Match your mounting needs using LB foot, FA flange, or TC trunnion hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X30SCM FAQ
This 32 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
The -S suffix provides a built-in magnet for CMSG, DMSG, or EMSG switches. The adjustable air cushion only decelerates the piston near stroke end and does not brake or hold position; you must use an external rod lock or pilot check valve to prevent drift on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X30SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.