Airtac MIC Cushioned Mini Cylinder MIC32X350CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X350CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X350CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding actuation with a 350 mm stroke. The stainless-steel barrel and rod resist mild corrosion, making it suitable for washdown environments. It features a 1/4 inch port and a CM round rear cover for flexible mounting orientation.
A defining trait of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to absorb high-speed shock, protecting the load and lowering noise. This base SKU lacks a magnet and cannot accept position sensors; adding the -S option enables CMSG, DMSG or EMSG switches. With a 402.2 N push force, it yields a safe working load of about 241 N, lifting roughly 20.5 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC32X350CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X350CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X350CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X350CM Is Used
High-Speed Diverting
Uses the 402.2 N thrust to push parcels off a fast belt, relying on the adjustable cushion to stop the 350 mm stroke smoothly without slamming.
Carton Flap Folding
Drives a folding arm on a packaging line where the needle-set cushion prevents crushing the cardboard at the end of the rapid travel.
Vertical Lift Gates
Lifts light access gates or guards weighing up to 20.5 kg, benefiting from the stainless build in damp or washdown logistics zones.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X350CM the Right Cylinder?
When sizing this 32 mm bore, stepping down to the MIC25X50 provides 245.3 N of push at 0.5 MPa, while the larger MIC40X50 offers 628.3 N if you need more thrust. Choose this 32 mm model when your application requires moving moderate masses at high speeds, as the adjustable air cushion is essential for preventing harsh end-of-stroke impacts.
The cushion only decelerates the piston near the stroke end; it is not a brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot check valve to hold a suspended load. Mounting options include LB foot, FA flange, SDB pivot and TC trunnion brackets. Because this specific code lacks the -S suffix, it cannot support magnetic sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X350CM FAQ
This 32 mm bore cylinder has a 1/4 inch port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. The adjustable air cushions at both ends only serve to decelerate the load at stroke end and do not lock the position.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X350CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.