Airtac MIC Cushioned Mini Cylinder MIC32X350SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X350SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X350SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding mid-weight tasks. The stainless-steel barrel and rod resist mild corrosion, making it suitable for washdown environments. A 1/4" port supplies air to the 12 mm piston rod, while the CM round rear cover provides a compact mounting footprint.
Twin adjustable air cushions distinguish this unit from standard bumper models, letting you needle-set the deceleration to silence end-of-stroke impacts at high cycling speeds. With a 0.5 MPa push rating, it yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin. The integrated -S magnet supports CMSG, DMSG, and EMSG position sensing.
Airtac MIC Cushioned Mini Cylinder MIC32X350SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X350SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X350SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X350SCM Is Used
High-Speed Carton Diverting
Uses the 402.2 N push force to rapidly deflect heavy packages on a sorting line, relying on the adjustable air cushion to prevent harsh slams during continuous 350 mm strokes.
Automated Pallet Loading
Pushes wrapped goods into pallet positions, where the stainless build resists moisture and the needle-set deceleration protects fragile contents from sudden stops.
Component Press Fitting
Applies a consistent 241 N safe working load to seat bearings, using the CMSG sensors to confirm the exact 350 mm extension before retracting the assembly.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X350SCM the Right Cylinder?
If 402.2 N of push at 0.5 MPa is excessive, the smaller Ø25 bore offers 245.3 N; stepping up to the Ø40 provides 628.3 N. The adjustable cushion proves invaluable when moving heavy loads at high velocities, as it protects the mechanism from destructive end-of-stroke shock. Keep in mind the cushion only decelerates the piston and does not function as a brake.
Because a standard cylinder drifts when air pressure drops, install an external rod lock or pilot-operated check valve to suspend loads securely. Mount this 350 mm stroke unit using compatible LB foot, FA flange, or TC trunnion hardware. The built-in magnet allows seamless sensor integration, whereas non-S variants cannot accept switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X350SCM FAQ
This double-acting cylinder features a 1/4" port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end to reduce shock; it is not a locking brake. The piston will drift if air pressure is lost, so you must use an external rod lock or pilot check valve to hold suspended loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X350SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.