Airtac MIC Cushioned Mini Cylinder MIC32X350SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X350SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X350SU
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial workloads with a 350 mm stroke. The stainless-steel barrel and rod resist mild corrosion, making it suitable for washdown environments. A built-in piston magnet (-S) enables position sensing with CMSG, DMSG, or EMSG switches. It features a 1/4" port and an M10x1.25 male rod thread.
The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the deceleration to absorb end-of-stroke shock at high speeds, protecting the load and reducing noise. Based on the 0.5 MPa push rating, this bore provides a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin. The U-style back cover provides a 90-degree mounting orientation.
Airtac MIC Cushioned Mini Cylinder MIC32X350SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X350SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X350SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X350SU Is Used
Package Diverting
Drives a diverter arm on a packaging line, using the 350 mm stroke to route heavy cartons smoothly without end-of-stroke slamming.
Vertical Material Lift
Lowers a 20 kg fixture reliably, relying on the adjustable cushion to prevent harsh impacts at the bottom of the 350 mm descent.
Clamp Actuation
Secures metal workpieces in a machining fixture, delivering 402.2 N of push force while the stainless build withstands cutting fluid.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X350SU the Right Cylinder?
If you need less force, the smaller Ø25 bore provides 245.3 N of push at 0.5 MPa, whereas stepping up to the Ø40 bore yields 628.3 N. Choose this Ø32 model when moving heavier loads at high speeds, as the adjustable air cushion is essential for smooth deceleration. Note that the cushion only slows the piston near the end of the stroke; it does not function as a brake. For position holding on air loss, install an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X350SU FAQ
This double-acting cylinder uses a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and does not act as a lock. The piston will drift if air is lost. To hold a load, use an external rod lock or pilot check valve. The -S magnet supports CMSG, DMSG, and EMSG sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X350SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.