Airtac MIC Cushioned Mini Cylinder MIC32X350U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X350U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 350mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke350 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X350U
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X350U is a double-acting, round-body stainless steel mini cylinder built for a 350 mm stroke. It features a U-style 90-degree rear cover and a 1/4 inch air port. A defining trait of this series is the adjustable air cushion at both ends. You turn a needle valve to soak up high-speed end-of-stroke shock, protecting the load and cutting noise better than a fixed bumper.
The stainless barrel and piston rod resist mild corrosion and washdown environments. Based on the 0.5 MPa push rating, this bore yields a safe working load of roughly 241 N, meaning it lifts about 20.5 kg vertically with a 2:1 safety margin. Note this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG position switches.
Airtac MIC Cushioned Mini Cylinder MIC32X350U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X350U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X350U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X350U Is Used
High-Speed Carton Diverting
Uses the 402.2 N thrust to push heavy cartons at 800 mm/s, relying on the adjustable cushion to prevent harsh slams at the 350 mm stroke end.
Vertical Flap Folding
Lifts roughly 20.5 kg of packaging mechanism vertically with a 2:1 margin, while the stainless build handles occasional washdown spray.
Pallet Stopper Gate
Acts as a 350 mm travel gate for pallets, using the needle-set air cushion to gently decelerate the 32 mm bore before it hits the U-cover end.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X350U the Right Cylinder?
When sizing, step down to the MIC25 (245.3 N push @0.5 MPa) for lighter loads, or step up to the MIC40 (628.3 N push @0.5 MPa) when you need more thrust. The adjustable cushion matters most when driving heavy loads at high speeds up to 800 mm/s, letting you dial in deceleration to prevent mechanical shock.
Remember the cushion only decelerates near the stroke end; it is not a brake. If air pressure drops, the piston drifts, so add an external rod lock or pilot check valve to hold a load. For mounting, pair the U cover with LB foot, FA flange, SDB pivot, or TC trunnion hardware. To add sensing later, you must switch to the -S magnet version.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X350U FAQ
This 32 mm bore cylinder has a 1/4 inch port and an M10x1.25 male rod thread. It pushes 402.2 N and pulls 345.6 N at 0.5 MPa. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical max force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks the internal magnet, so it cannot accept CMSG, DMSG, or EMSG switches. You need the -S variant for sensing. It still features adjustable air cushions at both ends and a stainless build for mild corrosion resistance.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X350U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.