Airtac MIC Cushioned Mini Cylinder MIC32X35SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X35SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 35mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X35SCM
Soaking up high-velocity impacts at both stroke ends, the AirTAC MIC32X35SCM relies on a needle-set variable air cushion rather than a fixed bumper to decelerate heavy loads smoothly. This double-acting, round-body stainless-steel mini cylinder brings 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, stepping up to 563 N push at 0.7 MPa. The riveted stainless barrel and Ø12 mm rod resist mild corrosion and washdown environments.
Driven by a 1/4" port and an M10x1.25 male rod thread, this unit includes a built-in piston magnet (-S) for CMSG, DMSG, or EMSG position sensing. In practical terms, it yields a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 safety margin. The CM round rear cover helps streamline port and mounting orientation in tight machinery.
Airtac MIC Cushioned Mini Cylinder MIC32X35SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X35SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X35SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X35SCM Is Used
Package Diverting
Handles 20 kg cartons at 800 mm/s on sorting lines, using the adjustable cushion to stop the stroke softly without jarring the conveyor frame.
Filler Sealing
Drives sealing heads on liquid packaging machines where the stainless build shrugs off washdown and the 402 N push force secures the seal.
Light Pressing
Inserts small bearings or pins into housings, relying on the 241 N safe working load and CM rear cover for stable, shock-free positioning.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X35SCM the Right Cylinder?
When sizing this 32 mm bore, stepping down to the Ø25 MIC drops the 0.5 MPa push force to 245.3 N, while moving up to the Ø40 MIC raises it to 628.3 N. Choose this 35 mm stroke model for short, fast cycles where the adjustable end cushions are essential to prevent endcap slamming. The cushion needle only decelerates the piston near stroke end; it will not hold a load. For vertical or suspended loads that must resist drifting on air loss, add an external rod lock or pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets, and the -S magnet allows seamless sensor integration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X35SCM FAQ
This double-acting cylinder uses a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The needle-set air cushion only decelerates the piston near the stroke end to reduce shock; it is not a brake and will not hold a load on air loss. The -S suffix means a piston magnet is installed, allowing you to mount CMSG, DMSG, or EMSG sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X35SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.