Airtac MIC Cushioned Mini Cylinder MIC32X360SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X360SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 360mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke360 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X360SCM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting stainless steel round-body mini cylinder handles demanding mid-range automation. The defining feature of the MIC series is the adjustable air cushion at both ends. By turning a needle valve, you tune the end-of-stroke deceleration to absorb shock at high travel speeds, protecting the load and cutting noise far better than a fixed bumper.
The stainless barrel and rod resist mild corrosion and washdown environments. This specific configuration includes a built-in piston magnet for position sensing and a CM round rear cover. It operates at 30-800 mm/s on a 1/8 inch port. With a safe working load around 241 N, it lifts about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X360SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X360SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 360 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X360SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×360 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X360SCM Is Used
Package Diverting
Pushes heavy cartons at high speed across transfer belts, using the adjustable cushion to stop the 402 N stroke smoothly without smashing the load.
Box Flap Folding
Drives packaging flaps down rapidly on a filling line, relying on the tuned air cushion to decelerate before the end of travel and reduce mechanical noise.
Pallet Loading
Positions dense components toward a pallet wrapper, managing the 241 N safe working load while the stainless build handles humid dock environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X360SCM the Right Cylinder?
When sizing this 32 mm bore, stepping down to a 25 mm MIC bore drops the push force to 245.3 N at 0.5 MPa, while stepping up to a 40 mm bore raises it to 628.3 N. Choose this 32 mm model when moving heavier masses at high speeds where the adjustable cushion is essential to prevent impact damage. Note that the air cushion only decelerates the piston near the stroke end; it does not hold the load. If air pressure drops, the piston will drift, so fit an external rod lock or pilot check valve for position holding.
Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets. Because this SKU carries the -S suffix, it is ready for CMSG, DMSG, or EMSG reed and electronic sensors. A non-S SKU cannot accept a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X360SCM FAQ
This double-acting cylinder uses a 1/8 inch port and a 12 mm rod. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No. The adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. If air pressure drops, the piston will drift. You must add an external rod lock or pilot check valve to hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X360SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.