Airtac MIC Cushioned Mini Cylinder MIC32X370SCM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X370SCM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 370mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke370 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X370SCM
Delivering 402.2 N of push force at 0.5 MPa, the MIC32X370SCM is a double-acting, round-body stainless-steel mini cylinder built for demanding cycles. The 32 mm bore pairs a 12 mm piston rod with a 1/8" port and a CM round rear cover. A built-in magnet (-S) enables CMSG, DMSG, or EMSG sensor switches for position feedback.
Twin adjustable air cushions let you needle-set the deceleration to absorb high-speed end-of-stroke impact, protecting payloads while cutting noise. The stainless barrel and rod resist mild corrosion and washdown environments. As a 32 mm bore, this is a non-ISO-6432 round-body unit. Based on the 0.5 MPa thrust, it handles a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 margin.
Airtac MIC Cushioned Mini Cylinder MIC32X370SCM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X370SCM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 370 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X370SCM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×370 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X370SCM Is Used
High-Speed Diverting
Handles the 241 N safe working load to push heavy cartons at 800 mm/s, relying on adjustable cushions to prevent harsh impacts at the 370 mm stroke end.
Vertical Flap Folding
Lifts roughly 20.5 kg packaging components vertically; the stainless build withstands washdown while the -S magnet tracks flap position via DMSG sensors.
Machine Guard Indexing
Moves heavy safety doors using the 563 N push force available at 0.7 MPa, with the CM rear cover facilitating clean port orientation in tight cells.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X370SCM the Right Cylinder?
For lighter cycles, the Ø25 bore (245.3 N push @0.5 MPa) might suffice, while the Ø40 bore (628.3 N push @0.5 MPa) is the next step up for heavier payloads. Choose this 32 mm model when moving substantial mass at high speeds, as the adjustable air cushion is critical for preventing end-stroke shock. It operates between 30-800 mm/s.
Remember that the air cushion only decelerates the piston near stroke end; it does not act as a brake. If air pressure drops, the piston will drift. For vertical or suspended loads that must hold position on air loss, fit an external rod lock or a pilot-operated check valve. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X370SCM FAQ
This 32 mm bore cylinder features a 1/8" port and a 12 mm rod with an M10x1.25 male thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the stroke end and is not a brake or lock. The piston will drift on air loss. For suspended loads, you must install an external rod lock or pilot check valve. The -S magnet supports CMSG and EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X370SCM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.