Airtac MIC Cushioned Mini Cylinder MIC32X400CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X400CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke400 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X400CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles substantial work with a 400 mm stroke. The MIC32X400CM features a stainless-steel barrel and rod to resist mild corrosion and washdown environments. A needle-set adjustable air cushion at both ends absorbs high-speed end-of-stroke shock, protecting your payload and cutting noise. The rear CM round cover provides a clean, versatile mounting orientation.
This non-magnetic SKU cannot accept a position switch, though ordering the -S variant adds a magnet for CMSG, DMSG or EMSG sensors. With a 1/8" port and an M10x1.25 male rod thread, it moves loads safely. Based on the 0.5 MPa push rating, expect a safe working load of about 241 N, which lifts roughly 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X400CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X400CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X400CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X400CM Is Used
High-Speed Carton Diverting
Cushions the 400 mm stroke when rapidly pushing heavy cartons at 0.5 MPa, using the 402.2 N thrust to divert goods without slamming the end cap.
Vertical Flap Folding
Lifts packaging flaps on a 32 mm bore, safely handling the roughly 20.5 kg vertical load while the needle-set cushion prevents jarring at the top of travel.
Stainless Parts Ejection
Ejects machined components in humid washdown areas where the stainless barrel resists mild corrosion and the CM rear cover eases port routing.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X400CM the Right Cylinder?
When sizing this 32 mm bore, stepping down to an MIC25 yields 245.3 N of push at 0.5 MPa, while stepping up to an MIC40 provides 628.3 N. Choose this 32 mm model when moving heavier fixtures along the 400 mm stroke at high speeds, as the adjustable air cushion is essential for preventing end-impact damage. The cushion only decelerates the piston near stroke end; it does not act as a brake. If you need to hold a load vertically during air loss, install an external rod lock or pilot check valve. Mount via LB foot, FA flange, SDB pivot or TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X400CM FAQ
This 32 mm bore cylinder has a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, or 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU lacks a magnet and cannot accept CMSG, DMSG or EMSG switches. You must order the -S variant for position sensing. The adjustable air cushion at both ends only decelerates the load near stroke end and does not lock or hold the piston in place.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X400CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.