Airtac MIC Cushioned Mini Cylinder MIC32X400U
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X400U is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 400mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke400 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X400U
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles. The stainless-steel barrel and rod shrug off mild corrosion, while the U-style 90-degree rear cover simplifies port and mounting orientation. A 1/8 inch port feeds the 12 mm piston rod to support rapid actuation.
Twin adjustable air cushions replace fixed bumpers, letting you needle-set the deceleration to absorb end-of-stroke shock across the 400 mm travel. Based on the 0.5 MPa push rating, the safe working load is roughly 241 N, lifting about 20.5 kg vertically with a 2:1 margin. Note this SKU lacks a magnet, so it cannot host CMSG, DMSG or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC32X400U Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X400U |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 400 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X400U
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×400 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X400U Is Used
High-Speed Diverting
Shifts heavier packages across a 400 mm stroke where the adjustable air cushion prevents harsh slamming at 800 mm/s.
Carton Forming Press
Provides 402.2 N of push at 0.5 MPa to fold corrugated flaps, using the U-cover for clean 90-degree mounting.
Vertical Lift Gate
Lifts roughly 20.5 kg with a 2:1 safety margin, relying on the stainless build for humid storage environments.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X400U the Right Cylinder?
For lighter loads, the MIC25X50 delivers 245.3 N push at 0.5 MPa, whereas stepping up to the MIC40X400 provides 628.3 N if your application outgrows this 32 mm bore. Choose this 32 mm variant when moving heavier masses at high speed, as the needle-set air cushion actively decelerates the piston to prevent impact damage.
Because this is a non-magnet SKU, position sensing is unavailable; add the -S suffix if you require CMSG or DMSG switches. Remember the cushion only slows the piston near stroke end and does not act as a brake; fit an external rod lock or pilot check valve to hold a load securely during air loss.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X400U FAQ
This 32 mm bore cylinder uses a 1/8 inch port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet and cannot host CMSG, DMSG or EMSG switches. You would need the -S variant for sensing. The adjustable air cushion at both ends only decelerates the load near stroke end and does not function as a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X400U
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.