Airtac MIC Cushioned Mini Cylinder MIC32X40CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X40CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 40mm stroke, 1/4" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke40 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X40CM
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles heavier duty cycles where standard small bores stall. The Ø32 mm stainless-steel barrel and rod shrug off mild washdown and corrosion, while the CM round rear cover keeps port orientation clean for tight assemblies. A 1/4" port feeds the chamber efficiently.
Twin needle-set air cushions at both ends absorb end-of-stroke shock at high speeds, protecting your payload and lowering machine noise compared to fixed-bumper designs. Lacking the -S suffix, this specific SKU has no magnet and cannot host CMSG, DMSG or EMSG sensors; add an -S variant if you need position feedback.
Airtac MIC Cushioned Mini Cylinder MIC32X40CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X40CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 40 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X40CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X40CM Is Used
Carton Diverter
Uses the 402.2 N push force to snap heavier packaging cartons off a main conveyor line without bouncing them back.
Parts Press
Pushes lightweight bearings or pins into housings, relying on the adjustable cushion to soften the impact at the 40 mm stroke end.
Pallet Stop
Halts incoming pallets on a gravity roller track, where the needle-set cushion prevents a hard metal crash.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X40CM the Right Cylinder?
With a safe working load of roughly 241 N (about 60% of its 0.5 MPa push force), this bore fits mid-range pushing and lifting. If you need less force, stepping down to the Ø25 MIC drops push output to 245.3 N; if you need more, the Ø40 MIC raises it to 628.3 N. The adjustable cushion shines when moving heavier masses at high speed, but remember it only decelerates the load near the stroke end. It will not hold position on air loss, so fit an external rod lock or pilot check valve if drift is unacceptable. Mount it via LB foot, FA flange, SDB pivot or TC trunnion brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X40CM FAQ
It uses a 1/4" port with an M10x1.25 male rod thread. At 0.5 MPa it pushes 402.2 N and pulls 345.6 N. At 0.7 MPa it pushes 563 N and pulls 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No. Because this model lacks the -S suffix, it has no internal magnet and cannot accept CMSG, DMSG or EMSG switches. You must select an -S version of the MIC cylinder to use magnetic sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X40CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.