Airtac MIC Cushioned Mini Cylinder MIC32X475SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X475SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 475mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke475 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X475SU
Delivering 402.2 N of push force at 0.5 MPa, this double-acting round-body mini cylinder handles demanding actuation with a 475 mm stroke. The stainless-steel barrel and rod resist mild corrosion, making it suitable for washdown environments. A built-in piston magnet allows integration with CMSG, DMSG, or EMSG switches for position sensing.
Unlike fixed bumper models, the MIC series features an adjustable air cushion at both ends. You can tune the needle valve to decelerate heavy loads smoothly at high speeds, protecting your machinery from end-of-stroke shock. With a 1/8" port and a safe working load of roughly 241 N, it lifts about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X475SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X475SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 475 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X475SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X475SU Is Used
High-Speed Diverting
Routes heavier packages on a conveyor using the 402.2 N push force, relying on the adjustable cushion to prevent harsh slamming during rapid 475 mm strokes.
Carton Erecting
Pushes folding carton blanks into position on packaging lines, where the stainless build withstands occasional washdowns and the tuned cushion protects the cardboard from crushing.
Vertical Lift Gates
Raises and lowers lightweight access gates, safely lifting loads around 20.5 kg while the needle valve ensures the gate settles softly without mechanical impact.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X475SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to a MIC25 model reduces the 0.5 MPa push force to 245.3 N, while stepping up to a MIC40 increases it to 628.3 N. Choose this unit when moving substantial mass at high cycling rates, as the adjustable end cushions absorb kinetic energy that a standard bumper cannot. The U-style 90-degree rear cover offers flexible port and mounting orientation.
Remember that the air cushion only decelerates the piston near the stroke end; it does not function as a brake. If your application must hold a load vertically during air loss, install an external rod lock or pilot-operated check valve. Because this SKU includes the -S magnet, it is fully ready for CMSG, DMSG, and EMSG sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X475SU FAQ
This 32 mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
Yes, the -S suffix indicates a built-in piston magnet for CMSG, DMSG, or EMSG sensors. However, the adjustable air cushion only decelerates the piston near stroke end and does not act as a lock; you need an external rod lock or pilot check valve to hold a load on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X475SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.