Airtac MIC Cushioned Mini Cylinder MIC32X50SU
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X50SU is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X50SU
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MIC32X50SU is a robust double-acting round-body mini cylinder built for demanding tasks. Its stainless-steel barrel and piston rod resist mild corrosion and washdown environments. A built-in piston magnet (-S) supports CMSG, DMSG, and EMSG position switches, while the U-style 90-degree rear cover simplifies port and mounting orientation. The 1/8 inch port feeds the 12 mm rod to generate substantial thrust.
Unlike basic bumper models, this unit features an adjustable air cushion at both ends. Turning the cushion needle lets you dial in the deceleration to absorb high-speed end-of-stroke shock, protecting the load and cutting noise. For practical sizing, expect a safe working load around 241 N, which means it lifts about 20.5 kg vertically with a 2:1 safety margin.
Airtac MIC Cushioned Mini Cylinder MIC32X50SU Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X50SU |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X50SU
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X50SU Is Used
Package Diverting
Handles heavier carton diverting on conveyors where the 402.2 N push force and adjustable cushions absorb the impact of rapid direction changes at high speed.
Clamp and Seal
Ideal for securing heavier packaging materials during sealing operations, using the 241 N safe working load to hold items firmly without bouncing.
Vertical Lift Gates
Raises and lowers light access gates or stops, easily managing the 20.5 kg vertical lift capacity while the needle-set cushions prevent slamming.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X50SU the Right Cylinder?
When sizing this 32 mm bore, stepping down to a 25 mm MIC bore drops the 0.5 MPa push force to 245.3 N, whereas stepping up to a 40 mm bore raises it to 628.3 N. Choose this model when moving heavier masses at high speeds, as the adjustable air cushion becomes essential to prevent harsh impacts. Note that the cushion only decelerates the piston near the stroke end; it does not lock or hold the load. If your application must prevent drift on air loss, add an external rod lock or a pilot-operated check valve.
Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion brackets. Because this SKU includes the -S magnet, you can directly mount CMSG, DMSG, or EMSG sensors for precise end-position detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X50SU FAQ
This 32 mm bore cylinder features a 12 mm piston rod, an M10x1.25 male rod thread, and a 1/8 inch air port. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, 563 N push and 483.8 N pull at 0.7 MPa, with a theoretical maximum force of 82 kgf at 1.0 MPa.
No, the adjustable air cushion only decelerates the piston near the end of the stroke to reduce shock; it is not a brake or lock. The piston will drift if air is lost. You must use an external rod lock or pilot check valve for load holding. The -S magnet allows CMSG, DMSG, and EMSG sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X50SU
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.