Airtac MIC Cushioned Mini Cylinder MIC32X600CM
The AirTAC Airtac MIC Cushioned Mini Cylinder MIC32X600CM is a genuine double acting + cushion round-body mini air cylinder with a Ø32mm bore and 600mm stroke, 1/8" air ports and a stainless-steel barrel and rod for mildly corrosive environments.
- BoreØ32 mm
- Stroke600 mm
- Port size1/8"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MIC Cushioned Mini Cylinder MIC32X600CM
Handling mid-range automation tasks, the AirTAC MIC32X600CM is a double-acting round-body mini cylinder built with a stainless-steel barrel and rod for mild corrosion resistance. It features a CM round rear cover and a non-standard 600mm stroke, exceeding the 500mm maximum standard for this bore and requiring made-to-order fabrication. Equipped with a 1/8" port and an M10x1.25 male rod thread, it delivers a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa.
The defining feature of this series is the adjustable air cushion at both ends, allowing you to needle-set the deceleration to absorb high-speed shock and reduce noise. For practical sizing, the safe working load is roughly 241 N, and it lifts about 20.5 kg vertically with a 2:1 safety margin. Note that this specific SKU lacks the -S magnet, so it cannot accept CMSG, DMSG, or EMSG sensors.
Airtac MIC Cushioned Mini Cylinder MIC32X600CM Technical Specifications
| Model | Airtac MIC Cushioned Mini Cylinder MIC32X600CM |
|---|---|
| Series | MIC mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting + cushion |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MI/MIC (ISO 6432) datasheet. Barrel & rod: stainless steel (round-body, riveted construction). Thread options: PT (blank) / G. Note: the Ø32 bore is a larger, non-ISO-6432 size.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MIC Cushioned Mini Cylinder MIC32X600CM
| MIC | round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MI-family variants: MI / MIC (double acting ±cushion), MSI / MTI (single acting push / pull), MID / MICD (double rod ±cushion), MIJ / MICJ (adjustable stroke ±cushion). Back covers CA / U / R / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MIC Cushioned Mini Cylinder MIC32X600CM Is Used
Extended-Reach Diversion
Pushes heavy cartons across a wide conveyor belt using the 600mm stroke, relying on the 402.2 N push force and adjustable air cushions to stop the load smoothly without slamming.
Large Pallet Dispensing
Actuates a pallet feeder mechanism in washdown-prone packaging zones, where the stainless steel construction prevents mild corrosion and the needle-set cushions protect the pallet stack.
High-Bay Tray Pusher
Transfers goods into high-density storage lanes, utilizing the extended travel and CM round end cover to manage rapid cycling while dampening shock at the end of the 600mm movement.
Is the Airtac MIC Cushioned Mini Cylinder MIC32X600CM the Right Cylinder?
When sizing this 32mm bore against the range, dropping down to the MIC25 provides 245.3 N of push force at 0.5 MPa, while stepping up to the MIC40 yields 628.3 N. The adjustable cushion is essential here if you are moving heavy loads at high speeds across the extended 600mm travel, as it prevents harsh end-of-stroke impacts. Remember that the cushion only decelerates the piston near the stroke end; it does not function as a brake or lock.
Because this is a plain double-acting cylinder, the piston will drift if air pressure drops or the valve is centered. To safely hold a suspended load, you must add an external rod lock or a pilot-operated check valve. For mounting flexibility, you can utilize LB foot, FA flange, SDB pivot, or TC trunnion brackets, and if position sensing becomes necessary, switch to the -S magnet variant to support CMSG, DMSG, or EMSG switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/R/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MIC Cushioned Mini Cylinder MIC32X600CM FAQ
This 32mm bore cylinder features a 1/8" port and an M10x1.25 male rod thread. At 0.5 MPa it provides 402.2 N of push force and 345.6 N of pull force. At 0.7 MPa, push increases to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
This specific SKU does not include a magnet, so it cannot accept CMSG, DMSG, or EMSG switches; you would need the -S variant for sensing. The adjustable air cushion at both ends allows you to turn a needle valve to decelerate the piston near the stroke end, absorbing high-speed shock, but it is not a locking brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MIC Cushioned Mini Cylinder MIC32X600CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.